Hi, i just ordered the small wonders sights for the sp 101 and was wondering if there is anymore to installing the sights other than punching the pin out and and putting it back? looks simply enough just wanted to ask before i do this project. Thanks in Advance Triton20
sp101 sight installion
- Thread starter triton20
- Start date
contender
Ruger Guru
Welcome to the Forum!
I'm not familiar with the sight you mentioned, but I have replaced the front sights on a few of my SP-101's. I usually just drift out the pin far enough to remove the current blade, and replace with the new blade, and drift the pin back in place. By not knocking the pin all the way out,, it's already aligned & in the hole for reassembly.
I'm not familiar with the sight you mentioned, but I have replaced the front sights on a few of my SP-101's. I usually just drift out the pin far enough to remove the current blade, and replace with the new blade, and drift the pin back in place. By not knocking the pin all the way out,, it's already aligned & in the hole for reassembly.
Thanks, these sights are new i think, Gemini customs has them [small wonders] they come in red and green optic colors and a more expensive gold bead. they also pre drill the hole for easy installion. i will post a picture when i get them installed.Thanks again. Triton20 
Similar threads
