So far I fired 100 rounds through it and dry fired about 50 times. The trigger is hard to pull and Im not used to it, its not like my semi-auto P95 which has an easier trigger pull. Is there something I can do to break this gun in faster? Is there some type of lubricant or oil that can make the trigger easier to pull. On the bright side I shot very well with it today. Again this is a double action only SP101 with laser. Thanks for any suggestions.
SP101 Trigger tension issue
- Thread starter customf1
- Start date
I second WWB. Get Wolff's replacement springs. I installed a lower force Wolff spring in my DOA SP101 and it made a big difference. Trigger pull is much lighter and its much easier to keep a good sight picture. If you do replace the spring, make sure the new one has enough power to set off whatever brand primers you're using. I've never had a failure to fire but it could happen with hard primers I guess.
flatgate
Hawkeye
I whole heartedly agree with gunboat57's reply. 
flatgate
flatgate
Hugh
Buckeye
Smokngun said:
I agree a lot. Part of the problem is new and needs a workout, another part of the problem is hand strength. To begin dry fire 20 or 30 times, then rest your hand for a few minutes; then do it again. Be sure to change hands. Before you know it you'll be able to dry fire 50 or 60 times without a rest, and before you know it you'll be dry firing 200 - 300 times in the evening. Before long you will have a smoother trigger and it won't seem to be so difficult.
I don't believe I'd do any thing with the springs at this early date.
For sure it is more difficult than your semi-auto. :wink:
