Ruger Three Screw Flat Tops

[rfo1]

I just joined the Ruger Forum today. I'm curious what these revolvers are selling for in your area. I'm just looking for ball park figures. The guns are all original, with no modifications, condition approx. 95%, no boxes or manuals.

1. .44 magnum, 7.5 inch barrel, walnut grips, serial # 227xx.

2. .44 magnum, 10 inch barrel, walnut grips, serial # 189xx.

3. .44 magnum, 6.5 inch barrel, plastic grips, serial # 92xx.

4. .44 magnum, 6.5 inch barrel, with British Proof marks, plastic grips, serial #268xx.

5. .357 magnum, 4 and 5/8 inch barrel, walnut grips, serial # 357xx.

Thanks for your time--
rfo1 in Canada

 

[BearStopper]

In my area the 44's generally range from $600.00 for a beater up to about $1500.00 for a nice one in the box, however I have seen examples priced at over $2000.00. The 7 1/2" is a premium and I have no idea of the British proofed one. The .357 in my area usually starts at $500.00 for a beater and as much as $1000.00 to $1200.00 for a nice example in box. Just what I have seen in my area and I am not even close to an expert.

 

[SAJohn]

Welcome to our forum. Wow, that is one heck of a first post. You list some mighty rare Ruger revolvers. I suggest you repost this in the Collector section to get our "big guns" looking at it.

 

[Bucks Owin]

Ahhh...A 10" .44 Flattop!! :wink:

Welcome!

 

[contender]

Welcome to the Forum!
You have some nice guns to ask about. First,, condition is very important. You have mentioned approximately 95%. Well,,, a few percentage points either way makes a big difference.
The 44's in 10" & 7-1/2" are rarer than the 6-1/2" ones. In todays depressed market,, prices can range from $600 or so,, up to about $1500 depending on which ones etc. The british proof marked one is a hard one to price as we rarely see them.
The 357 can be from %00 to $700 depending,,!
Next,,, I see you are in Canada,, so importing into the USA where the better money is available,,, well,, that can be an issue.

 

[chet15]

I just joined the Ruger Forum today. I'm curious what these revolvers are selling for in your area. I'm just looking for ball park figures. The guns are all original, with no modifications, condition approx. 95%, no boxes or manuals.

1. .44 magnum, 7.5 inch barrel, walnut grips, serial # 227xx.

2. .44 magnum, 10 inch barrel, walnut grips, serial # 189xx.

3. .44 magnum, 6.5 inch barrel, plastic grips, serial # 92xx.

4. .44 magnum, 6.5 inch barrel, with British Proof marks, plastic grips, serial #268xx.

5. .357 magnum, 4 and 5/8 inch barrel, walnut grips, serial # 357xx.

Thanks for your time--
rfo1 in Canada

If you post the full sn's, they might be worth a little more. Have matched up quite a few consecutive #'s for RF lurkers.
If you don't want to make it public, send me a PM and I'll check my notes.
Chet15

 

[flatgate]

2. .44 magnum, 10 inch barrel, walnut grips, serial # 189xx. 18978

3. .44 magnum, 6.5 inch barrel, plastic grips, serial # 92xx. 9211

I have a few "close ones".......

flatgate

 

[chet15]

Flatgate:
Neither one is a winner, although your 10" is 2 numbers off. Close but no ceeegar.
Chet15

 

[flatgate]

Flatgate:
Close but no ceeegar.
Chet15

flatgate