Thumbcocker
Blackhawk
I recently acquired a nice 3 screw super. First range trip with 429421's over 20.0 of 2400 showed that the gun is VERY accurate. However it hits about 2 1/2- 3 inches high at 25 yards with the sight screw bottomed out. It looks like the bottom of the rear sight, where the sight notch is touches the frame above the hammer. It looks like I might be able to dismount the sight and carefully remove metal from the rear sight where it is touching the frame above the hammer. Anyone with experience with this situation or advice feel free to comment.
Thanks.
Thanks.