instructor
Single-Sixer
Need help re installing hammer on 1022 trigger assembly. Finally got sear/trigger together(royal pain) and now hammer won't cock?? All help appreciated.
1022 hammer installation
- Thread starter instructor
- Start date
Precision32
Blackhawk
Is the end of the hammer spring setting in the socket of the hammer or above it?
OP
instructor
Single-Sixer
Yes, I did not have it seated as you mention to start with and discovered that it needs to be in that "pocket" on the hammer. Had a devil of a time getting that sear/trigger/pin installed and upon installing hammer and associated spring, the hammer will not cock. I only see one way for the sear/trigger to be installed but it appears that the hammer is catching on something preventing it from being cocked??
This is a Volkhartsen trigger unit and appears to be of quality construction, but wondering if I did correctly put the sear/trigger in correctly. As you know there is a small spring in the sear/trigger mechanism and noticed that it can be depressed and "clicks" when separated and perhaps this is the area I am messing up in??
I do very much appreciate your help anyway possible.
martin
This is a Volkhartsen trigger unit and appears to be of quality construction, but wondering if I did correctly put the sear/trigger in correctly. As you know there is a small spring in the sear/trigger mechanism and noticed that it can be depressed and "clicks" when separated and perhaps this is the area I am messing up in??
I do very much appreciate your help anyway possible.
martin
