John in WYO
Single-Sixer
Hi, gb3.
I read your post about needing an OM .357 cylinder.
If you would use a micrometer and get the following dimensions of your 9mm cylinder, I will check with a friend and see if there an OM .357 Magnum cylinder in his parts bin.
1. Diameter of the cylinder you have,
2. Length from back of cylinder chamber to front of cylinder chamber,
3. Length from ratchet face of cylinder pin hole to cylinder pin hole nose.
Be patient, please.
John in WYO
Edit: Please post the dimensions in your reply to my comment.
I read your post about needing an OM .357 cylinder.
If you would use a micrometer and get the following dimensions of your 9mm cylinder, I will check with a friend and see if there an OM .357 Magnum cylinder in his parts bin.
1. Diameter of the cylinder you have,
2. Length from back of cylinder chamber to front of cylinder chamber,
3. Length from ratchet face of cylinder pin hole to cylinder pin hole nose.
Be patient, please.
John in WYO
Edit: Please post the dimensions in your reply to my comment.
Last edited: