Super Redhawk in 41 magnum

[bearskinner]

I’ve been looking for Information on my 41 mag SRH. Super, not standard. Trying to find out how many were made, or?? I imagine it was a lipseys or accu sport gun produced in small batches? The gun is massive for those little .41 cal holes in the cylinder. Any production info would be welcome.

 

[contender]

Ruger doesn't share production numbers. And the RENE doesn't show a Super Redhawk in .41 mag at all. But the guide stops in 2010. They would have to have been made after 2010.

And if you think those holes look small,, look at a .357 Redhawk,,,,!

 

[AJGUNNER]

Ruger doesn't share production numbers. And the RENE doesn't show a Super Redhawk in .41 mag at all. But the guide stops in 2010. They would have to have been made after 2010.

And if you think those holes look small,, look at a .357 Redhawk,,,,!

 

[Sugar River]

Does anyone have evidence that a 41 Mag Super Redhawk exists?

 

[SteveRuger]

I have one! Shoots well.

 

[bearskinner]

I have one as well. I’ve never been able to find any info on them, that’s why I posted it up. It really likes the 250 grain bullets, and feels like a 22 shooting them. Wayyyy overbuilt and strong for a 41mag.?

 

[Aqualung]

Wow...

Didn't know they made them in .41...

Thanks a lot, I thought I had the full set of Ruger revolvers in .41 magnum with my .41 Blackhawk and .41 Redhawk...(though I admittedly don't have an Old Model Blackhawk, either).

Aqualung

 

[bearskinner]

I actually like the grip configuration of the Super over a standard Redhawk. In 41, there’s not really much recoil, but in the large calibers the grip angle plus the Hogue rubber grip, with the gel, really help.

 

[powder smoke]

Does anyone have evidence that a 41 Mag Super Redhawk exists?

Every owner does!

 

[bearskinner]

First one I’ve seen in quite a while for sale on GB now.

 

[Onty]

I have one as well. I’ve never been able to find any info on them, that’s why I posted it up. It really likes the 250 grain bullets, and feels like a 22 shooting them. Wayyyy overbuilt and strong for a 41mag.?

Here are two nice ones, perfect for 41 SRH:

https://www.mp-molds.com/product/mp-413-265-wnfp-41-cal-hollow-point-mold-multichoice/

As you could see, available also as HP.

 

[bearskinner]

I have that mold really like the penta in that one. Also cast an Accurate 250 grain GC, with a huge meplat. I’ll powder coat a batch of each and test some loads for accuracy.

 

[Onty]

I have that mold really like the penta in that one. Also cast an Accurate 250 grain GC, with a huge meplat. I’ll powder coat a batch of each and test some loads for accuracy.

Which MP mold you have, plain base, or gas check? How it compares in accuracy with Accurate?

I do not have mold for heavy weight in 41 and 44, but if I want to shoot heavy ones, it will be full throttle and with a gas check.

 

[bearskinner]

The Accurate mold is a 41-250FG it has a gas check and the meplat is .37 wide and .32 past the crimp groove. It’s a WFN hammer.
I just took the rear sight off the SRH and added a weigand mount, so I can wring some accuracy out of it.
My Blackhawk Bisley Hunter ( a magazine build I got from Mark) really likes the 215 jacketed XTP’s and Swift A frames.
Next month I have a 41m/410GNR dual cylinder gun coming in. That’s a 5” Octagon belt gun, 5 shot cylinders. I’ll load the GC hammers in that as well.
Starting to get addicted to those darn 41’s

 

[bearskinner]

As an FYI, there’s a Super RH in 41 mag on gunbroker with 2 days to go…. Pretty reasonable so far. Heck at that price I’ll go for a spare!

Ended up at $1275. Hope it gets used, there shooters

 

[bearskinner]

Just saw one listed on GI for $1,650.
I dont know if there that rare!

 

[bearskinner]

If anyone is interested in one, there’s a listing in GB right now ( not mine) and it’s only in the $600’s

 

[SteveRuger]

I am sure it will go for double that or more before the end!

 

[bearskinner]

Ended up at $1,700!

 

[sixshot]

Those 41 SRH;s with a 265 gr solid will handle just about any sane load you put in them & also about any animal on the planet within reason. They are way over built. Would love to find one.

Dick

 

[Ale-8(1)]

As an FYI, there’s a Super RH in 41 mag on gunbroker with 2 days to go…. Pretty reasonable so far. Heck at that price I’ll go for a spare!

Ended up at $1275. Hope it gets used, there shooters

Have a link to that? I went to GB and searched but didn't find any.

Sounds like an interesting version. :shock:

 

[hittman]

I didn’t find it under Completed Auctions either.

But I did see a 5.5 inch blued 41 Redhawk brought $1375 without a box!

A 7.5 inch blued with box sold for $1500.00!

 

[Ale-8(1)]

Well, I found this . . .

https://www.d4guns.com/product/ruger-super-redhawk-41-mag/

. . . but regardless of the description, the pictures show a normal ol' Redhawk, not a Super Redhawk.

But then I found this . . .

https://www.gunsamerica.com/926746947/Ruger-Super-Redhawk-41-Mag.htm

Hello! Zooming in, the photo appears to show a .41 MAGNUM rollmark, but it's a little blurry on the second digit. I dunno. :?

Finally, I found this . . .

https://video.search.yahoo.com/search/video?fr=yfp-t-s&ei=UTF-8&p=.41+super+redhawk+revolver#id=2&vid=df5b2620c32d1332924f91aa751ea0ea&action=click

Yep, a video of a .41 Mag SRH that looks pretty OK. :shock: :shock: :shock:

 

[bearskinner]

There’s a SRH 41 mag just listed on Gunbroker for $1,200. The last two I saw went fir $1,695 and $1,701

 

[Hunter6657]

That Super Redhawk 41 Magnum was mine and I ended up getting $1500 for it. I didn't have the box and paperwork with it nor the scope rings that came with it. I had another set of rings that I included with it.
I had picked up a blued Redhawk 41 Magnum pistol with the scope cuts on the barrel rib for a super low price (traded for it). I also have a Ruger Blackhawk 6.5" 41 Mag.

 

[Laserbait]

It would be great is the made a 7 shot version for the 41, Looks like there's more than ample room for an extra shot.

 

[Y2K]

The market for Ruger . 41 Magnum is accelerating.

The .357 and .44 are great revolvers but the .41 is rarer so.......