SP101 Reassembly Help

[Captains1911]

I'm trying to reassemble my SP101, and after I reinstall the trigger, I cannot pull the trigger, it is locked up. Everything I've read and watched says I should be able to pull the trigger and cycle the action normally at this point. The transfer bar is in the correct location. Any help here would be appreciated.

 

[Captains1911]

I figured it out, the plunger for the pawl had become partially dislocated. All is well.

 

[Kevin]

Well that didn't take long. Did you do anything to it while it was apart? The guy on YouTube who does the SP101 at home trigger job makes it look pretty easy.

 

[Jimbo357mag]

I figured it out, the plunger for the pawl had become partially dislocated. All is well.

I actually broke the plunger and bent the spring trying to put mine back together once. I am more careful now.

 

[Captains1911]

Well that didn't take long. Did you do anything to it while it was apart? The guy on YouTube who does the SP101 at home trigger job makes it look pretty easy.

All I did was give it a good cleaning. I've owned this gun for 14 years and this was the first time I had ever taken it apart. It surely won't be the last now that I know how easy it is (well, with the exception of the one little 2hr hiccup ).