daktaklakpak
Bearcat
- Joined
- Sep 1, 2012
- Messages
- 5
Hello, I will be receiving a 10/22, and plan to eventually modify it. I'll play around with the stock configuration for a while. I want to keep the gun open sights, but probably modded for tech sights or something similar. I've been browsing a lot of forums, galleries, etc and have found a few pictures that are kind of inline with what I am planning to do:
(these are actually from user CraigC but I can't seem to contact him about it)
Barrel: I've been browsing Green Mountain (http://www.gmriflebarrel.com/rugert...eterbarrels/ruger-10-22-920-bull-barrels-page) for barrels and am currently leaning toward a blued bull barrel, but haven't decided on length or fluted yet. Maybe a 18" or 20"?
Sights: I think I will eventually move away from the stock 10/22 sights at some point. I've been eyeing the tech sights, specifically the TSR100. I've seen that tech sights don't really fit on a bull barrel unless you get the slip-fit adapter that only fits on the end of the barrel, or there is the NDS that can slide along the barrel. However, I am aiming for the (what I personally consider) clean setup in the first two pictures above, noting how the front sight is mounted. What kind of sights are they using (I know it might be hard to tell) or is it built into the barrel? Or any other suggestions?
Stock: The stock I plan to get is a standard Hogue stock (black or OD), but I am kind of interested in the Boyd Tacticool stock from the first picture. Maybe some other suggestions?
Thanks for any help or criticism
(these are actually from user CraigC but I can't seem to contact him about it)
Barrel: I've been browsing Green Mountain (http://www.gmriflebarrel.com/rugert...eterbarrels/ruger-10-22-920-bull-barrels-page) for barrels and am currently leaning toward a blued bull barrel, but haven't decided on length or fluted yet. Maybe a 18" or 20"?
Sights: I think I will eventually move away from the stock 10/22 sights at some point. I've been eyeing the tech sights, specifically the TSR100. I've seen that tech sights don't really fit on a bull barrel unless you get the slip-fit adapter that only fits on the end of the barrel, or there is the NDS that can slide along the barrel. However, I am aiming for the (what I personally consider) clean setup in the first two pictures above, noting how the front sight is mounted. What kind of sights are they using (I know it might be hard to tell) or is it built into the barrel? Or any other suggestions?
Stock: The stock I plan to get is a standard Hogue stock (black or OD), but I am kind of interested in the Boyd Tacticool stock from the first picture. Maybe some other suggestions?
Thanks for any help or criticism