barber
Bearcat
I need loading information for .44 mag, .240 gr Semi Wad Cutter, using WLP primers, and Alliant 2400 powder. Any help will be appreciated. Thanks
need loading info
- Thread starter barber
- Start date
Rick Courtright
Hawkeye
Hi,
I don't load 2400, but know a few who do. One thing to watch for w/ that powder: about half of 'em report Chief's results, w/ good accuracy over a range of charges. The other half find 2400 to be a bit picky about finding the "sweet spot" which may end up being only 0.5 gr or so wide.
So if you try a load "everybody" says works IN THEIR GUN, and it doesn't in YOURS, don't give up too soon. Work up or down a little at a time... you'll probably find a really nice load along the way!
Rick C
I don't load 2400, but know a few who do. One thing to watch for w/ that powder: about half of 'em report Chief's results, w/ good accuracy over a range of charges. The other half find 2400 to be a bit picky about finding the "sweet spot" which may end up being only 0.5 gr or so wide.
So if you try a load "everybody" says works IN THEIR GUN, and it doesn't in YOURS, don't give up too soon. Work up or down a little at a time... you'll probably find a really nice load along the way!
Rick C
WIL TERRY
Buckeye
ARE YOU SAYING, SIR, that you do not have any loading manuals ??
DO NOT USE any loading data off the internet without checking it against several loading manual sources.
This of course assumes you like your current complement of fingers and eyeballs to remain where they are and working in a normal manner.
DO NOT USE any loading data off the internet without checking it against several loading manual sources.
This of course assumes you like your current complement of fingers and eyeballs to remain where they are and working in a normal manner.
powder smoke
Hawkeye
^^^^^^ What He Said ^^^^^^
GasGuzzler
Hawkeye
I doubt the OP is 12 years old so let's assume he is responsible and either choose to help him or skip the topic if you are concerned about his ability.
My sources are all around 20.
My sources are all around 20.
Barber, with the new electronic test equipment and legal responsibilities the the new data for the 240 swc using 2400 the books are downgrading the maximum load weight to 20.5. That was the number I used for the last few years. You have to take into account, and I am sure you know this, all the variables that affect the loaded cartridge...and I think you are using a good primer tor this project..good luckbarber said:
Jimbo357mag
Hawkeye
Are you loading lead or a jacketed bullet. If loading lead you might want to back it down a little depending on hardness.
21.0gr is max with a Speer Gold Dot 240gr bullet.
http://www.alliantpowder.com/reloaders/index.aspx
21.0gr is max with a Speer Gold Dot 240gr bullet.
http://www.alliantpowder.com/reloaders/index.aspx
Rick Courtright
Hawkeye
Snake45 said:
Hi, Snake
I first ran into this "situation" when a buddy was shooting revolvers for silhouettes. His .44 Mag's a Smith 629, 8 3/8" and it was "challenging" at first. After considerable time w/ the chrono and lots of paper, he found the "window" for his gun was between a half to a full grain under what the Alliant book called for as a max. The difference was QUITE noticeable, too!
I mentioned this in a conversation here several years ago, and a few members reported similar experiences w/ 2400. As had a couple of guys my buddy shot silhouettes with, so I guess it's "real." My .44 Mags are loaded w/ either Unique or 296, and my 7 1/2" RH likes both, so I can't say much more...
Rick C
WIL TERRY
Buckeye
6gun said:
I BEG YOUR HUMBLE IGNORENT PARDON !!!
I gave the "barber " the straight scoop right from the horses mouth amd he took in like a MAN. YOU on the other hand have NOT a clue what you are saying and instead of the hard written loading information send him to that data that has the ugly little secret of being Hacked, and you'll never know until it is too late. But then you do NOT really care about that, do you ?!
bigboredad
Blackhawk
I agree with Wil on this one and that is not just because I know who he really is and the contributions he has made to our sport. I wouldn't be at all surprised if will hasn't forgotten more than you could happen to ever know so sixgun to you and everyone else that is too lazy to look up your own data maybe reloading is too difficult for you
Cherokee
Single-Sixer
WIL just tells it like it is. Load manuals are very useful, good to have and can be referenced without a PC.
GasGuzzler
Hawkeye
....but his comments helped not....
Aliant doesn't show the specific load online but there are ways to get the info. Some people ask here and get crappy answers. Don't be an internet lawyer please, anyone who's not really one.
Aliant doesn't show the specific load online but there are ways to get the info. Some people ask here and get crappy answers. Don't be an internet lawyer please, anyone who's not really one.
GasGuzzler
Hawkeye
I've been loading for the .44 Rem. Mag. for over 50 years, & have tried most every possible combination of bullets & powders. I long ago settled on Hornady bullets (200 & 240 Gr. XTP's now), WW Large Pistol Primers, & WW-296 powder as the most pleasing performers, usually just shy of Max. loads. I do use some 2400 in a few .357 loads yet.
tek4260
Buckeye
Start at 21gr and work up from there in 1/2gr increments watching for pressure signs. Better yet, if your are looking for a medium load for the 44, use 21gr of 2400. If you are looking for a magnum load, use H110/W296.
Jimbo357mag
Hawkeye
I much prefer to get data online from the powder manufactures website where you know you will get the most up-to-date info and latest announcements like recalls. That's not to say cross-checking the data isn't necessary. Using old printed data can be dangerous and there can be mistakes in print also. Never rely on just one source. ...and it doesn't hurt to ask someone elses opinion. 
barber said:
Hope you were able to find Alliant powders web site and their powder data they keep it updated as well which is most important that you use newest data, if you have any futher questions about Alliant click ask the experts Alliant will answer any questions you have, they have real experts working at Alliant instead of self proclaimed ones like you find here, never trust anything you read on line from a gun forum, alway go direct to the manufactures site they make and test their powders and know more about them then any other source.
anachronism
Single-Sixer
I suggest this manual to everybody just starting out reloading handguns. Cast or jacketed.
GasGuzzler
Hawkeye
Bleh
anachronism
Single-Sixer
6gun said:Cool I wasn't aware Lyman had a reloading manual specifically for hand guns, does it have more data compared to their stand manual? I just might need one, thanks for posting this.
There have been three editions printed, this is the current one. I have all three... Make sure you read the articles in it too!
anachronism said:6gun said:Cool I wasn't aware Lyman had a reloading manual specifically for hand guns, does it have more data compared to their stand manual? I just might need one, thanks for posting this.
There have been three editions printed, this is the current one. I have all three... Make sure you read the articles in it too!
Wow 3rd edition before I found out about them, been using my latest Speer manual mostly for hand gun, has lots of Ruger Only loads as well as short barrel loads real good info. I've also worked up some of my own loads not printed in any manual, you can never have to many reloading manuals to read and learn something new from.
Similar threads
Latest posts
-
How many of the retired or near retired folks see a doctor regularly?
- Latest: pistol pete
-
-
-
-
-
-
-
-
-