M77 new trigger

[wayne0]

I put a Timney trigger and sear in my M77 MkII RSI. Best thing I ever did outside of the Volquartson trigger in my MK4 pistol.
Pull is around 2.5 lbs. The safety is tricky, but if you pay attention, you can get it right,

 

[Gator89]

I put a Timney trigger and sear in my M77 MkII RSI. Best thing I ever did outside of the Volquartson trigger in my MK4 pistol.
Pull is around 2.5 lbs. The safety is tricky, but if you pay attention, you can get it right,

I put the same trigger and pull weight in my MkII 7mm mag.

 

[wayne0]

I put the same trigger and pull weight in my MkII 7mm mag.

You gotta love it, right?

 

[Gator89]

You gotta love it, right?

Yep.

 

[kmoore]

I did the same about 10 years ago on a LH Hawkeye. Not a tough project, as I recall I removed some inside wood to get the safety to function.

 

[wayne0]

Didn't have to remove wood, but the metal work on the safety was tricky

 

[Gator89]

Didn't have to remove wood, but the metal work on the safety was tricky

I did not remove metal off the safety lever's shoulder. I removed metal from the shoulder of the trigger supplied by Timney. If desired, the factory trigger can be reinstalled in my 77 Mk II . No stock in letting was necessary.

I installed a Timney in a Browning X Bolt and I had to remove some wood inside the stock.

 

[wayne0]

Yes, the factory trigger can be re-installed.The metal needed to be removed from the Timney only.