Grip identification MkII?

[ArizonaTea123]

I found these yesterday at my LGS. What is odd is that they are "left-hand" target grips.
So these will fit a MkII? Will they fit any other model of the Mk series?

 

[eveled]

Even though they are lefty they are desirable to anyone who has the matching right hand set and use the 2 flat grips then have the option to use the thumbrest on either side.

 

[Watertender]

They will fit a Mark 1 or Standard but the hammer pivot pin can migrate to the left and come loose because of the cutout in the grip for the bolt stop lever.

 

[NH Rugerman]

Based on the hole spacing and the medallions, those look like MkII grips to me….

 

[Dan in MI]

They will fit any A100 frame prior to MK-II and MK-II’s. Post MK-II may require some fitting.

 

[rugerguy]

Good info above as to the frame configuration (A-100, the second or later MK I guns) and I believe if you inlet and notch out the left panel, it should work on a MK III also.....
though tough for a lefty to use the mag relesae button, ask me how I know, BUT I never owned or would own any Mk III.............

'AT', those are a nice set of MK II grips.....

 

[Watertender]

I forgot to mention that those grips fit the A100 frame on the Mark 1 and Standard. The older A54 frame has different spacing of the screw holes.

 

[Highstandardguy]

Based on the red logo background and cutouts, I would say these are late MKII grips. As mentioned above, they should fit any A-100 frame MARK with the MKI hammer pin caveat.