bisley hammer on single-six?

[Three50seven]

Am I correct in saying that a Bisley hammer will fit a new model single-six? I really like the look, so I'm thinking of installing one in my single-six.

 

[flatgate]

Absolutely! Just order the Bisley Single-Six model.

A pair of .32 H&R Mag. Single-Sixes with "owner" installed hammers. Some metal work is required.

flatgate

 

[Three50seven]

Great lookin guns!! What exactly do you mean by "some metal work is required" though? I'm definitely no machinist...

 

[Robb Barnes]

He means you have to remove some of the hump on the lower part of the bisley hammer where it goes through the grip frame. You don't have to be a machinist to do it. It can be done with a dremel or even a file then finished with a fine file and emory cloth. You basically want the lower part of the bisley hammer to match the lower part of the hammer you already have on the gun.

 

[Three50seven]

Oh ok, that sounds managable

 

[JWhitmore44]

I laid the old single six hammer on top of the new bisley single six hammer and used a mark to color in the section I needed to remove. I used my small bench grinder with some water to dip it in to keep it cooled off. Once the bulk was removed I used the dremel to to finish and polish it up.