Chuckbuster
Single-Sixer
Looking for Cast Loads for .32 H&R with a 115-118 gr SWC.
Any suggestions?
Thanx
Kevin
Any suggestions?
Thanx
Kevin
32 H&R ??
- Thread starter Chuckbuster
- Start date
41 mag fan
Single-Sixer
If you don't hear from Flat gate try sending him a PM. If memory serves he has a load he favors with 115 grain LBT he likes.
Chuckbuster...
I shoot 115g lasercast with 8.4g of Lil'Gun with std primers for 1100 fps
115g Hunters Supply with 9.0g of H-110 and std or Mag primers for abt 1025 fps
But my alltime fav is 95g Penn SWC with 10.3g of H-110 and mag primer for 1150 fps
These are all out of a 6" barrel
FrontSite
I shoot 115g lasercast with 8.4g of Lil'Gun with std primers for 1100 fps
115g Hunters Supply with 9.0g of H-110 and std or Mag primers for abt 1025 fps
But my alltime fav is 95g Penn SWC with 10.3g of H-110 and mag primer for 1150 fps
These are all out of a 6" barrel
FrontSite
OP
Chuckbuster
Single-Sixer
Thanx
Have H110 on the shelf think I'll start there,
Might have some lil'gun around also
Have H110 on the shelf think I'll start there,
Might have some lil'gun around also
flatgate
Hawkeye
I use W296 which is pretty darn close ( 
) to H-110.
Fill the case up to the base of your seated bullet. Subtract one grain.
Use a Small Rifle Primer. Crimp 'em firmly. I use a Redding crimp die.
Works GREAT in my Ruger Single-Sixes.
flatgate
) to H-110.Fill the case up to the base of your seated bullet. Subtract one grain.
Use a Small Rifle Primer. Crimp 'em firmly. I use a Redding crimp die.
Works GREAT in my Ruger Single-Sixes.
flatgate
Kevin have you tried any Precision Cast 32 bullets? they are 100 grains RCBS it looks like. I got a box and have been playing with them. So far have only tried Unique loads of 4.0 but they are shooting pretty good so far. He should be just up the road from you in Springport
OP
Chuckbuster
Single-Sixer
I know of Precision Cast, have a mold for a 115 my Bro-in Law made.
Flatgate, Why the Small Rifle Primer?
Thanx
Flatgate, Why the Small Rifle Primer?
Thanx
protoolman
Service-Sixer
I tried several loads in my single sixes with several powders. Surprisingly red dot turned out the most accurate by far. I know everyone likes the slower powders but red dot was far better in my tests in medium not so hot loads.
protoolman
Service-Sixer
A commercial cast 115 gr SWC with a hard lube. Also shooting and old lyman roundnose I cast myself with wheelweight that I think goes 90gr? I really should go look
flatgate
Hawkeye
Chuckbuster said:
'cause that's the load I was given. I've shot thousands of them out of my .32 cal. Ruger Single-Sixes.
flatgate
OP
Chuckbuster
Single-Sixer
Thanx to all, have some h110 loaded, trying to get to the range. I'll forward results.
Kevin
Kevin
