Which chronograph?

robdog9761

Bearcat
Joined
Feb 20, 2011
Messages
5
City & State/Province
South Eastern New Mexico
I've just started reloading, and am looking at chronographs. Can some one suggest a good brand, or certain model in a brand. There are quite a few, and I'm not sure what I need. Thanks for everyones help
 
Well,, I personally own a Ohler 35P. I've had mine for years. It's considered by many as THE best one in the market. They stopped selling them in the open market several years ago due to the "cheaper" units outselling them. I spoke with Ken Ohler at the SHOT Show,, and they are being offered again for a limited time.
Next,, many folks have had good service out of the PACT models. Inexpensive,, yet usable.
CED makes a good one,, but it's seems to be a bit more "technical" to some folks than they want.
I find it interesting that at the major USPSA matches I attend where it's a requirement to have your match ammo chronoed,, they all seem to use the Ohler,,,!
Just my experiences,,!
 
I have a Chrony brand and if i remember it is an F1 model. Fairly easy to use and I also have the printer to go with it and that makes keeping notes easy. Just attach the printout for shot strings to the load data cards for easy reference.
 
I got a F1 Chrony. Works great. Yes, I have to write down the velocity after each shot, but no biggie. When I get home I dump data into a spreadsheet to get average and STD DEV. Not sure why you would need more than that, other than convenience .
 
If you have to have the best then get out your wallet..

If you want something to give a good indication of velocity/pressure
for casual reloading then you could get something less expensive and
be fine.

I've had a ProChrono for over four years now .. ran it over with
the four wheeler once and had to reassemble .. works fine for $100

FrontSite
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
i bought the least expensive one that i could find with a remote display.

i believe it is an F1 Master? i know it's an f1 and has the phone cord that allows me to set the remote display on the bench. i just write down my numbers and then come home and dump them into excel.

the only times it has failed to read was when i forgot to turn it on. :lol:
 
I've put my Chrony F1 through the wringer, thousands of rounds at 3 ft from the muzzle. (I've had the muzzleblast from a couple rifles actually blow it over on a tripod!) The readout is so pockmarked from unburned powder and splattered from bullet lube to be nearly illegible, I need to buy the printer for it this summer so I can read it easier. It has rattled around in an ammo can for thousands of miles in the back of the jeep. If it fell apart next time I used it, I would still be satisified with it. But after 6-7 years, (can't remember exactly) it just keeps on ticking...
I'd buy another in a heart beat....

(Operating hint: DON'T SHOOT IT!!! :lol:)
 
at 3 ft from the muzzle
Now why 3 feet? The manual recommends 10-15 feet.... which I find works just fine. Just curious :) .

BTW, I use a photo tripod for mine to get it 'just' the right height for bench resting.
 
Rclark said:
BTW, I use a photo tripod for mine to get it 'just' the right height for bench resting.

Me Too .. works great !

BTW .. this is the Chrono I got.. looks like it went up $20

http://www.midwayusa.com/viewproduct/?productnumber=852429

FrontSite
 
i had two chronos. Neither were very accurate or reliable. I bought a pact and it seems to work real well. Not as good as my buddy ohler but there hard to find now and expensive when you do find one.
 
Yes.

It has its brains separate from its (inexpensive to replace) skyscreens.
It offer sufficient ballistic information.
It works well once a proper and repeatable lighting source is determined.
It is relatively inexpensive to purchase.
PACT service is excellent and responsive.

I have used mine for over fifteen years.
 
I have the prochrono that I have been using for the past five years. For the money I have been pleased. I think Midway gets about $120.00 for the unit now. :)
 
Rclark said:
at 3 ft from the muzzle
Now why 3 feet? The manual recommends 10-15 feet.... which I find works just fine. Just curious :) .

BTW, I use a photo tripod for mine to get it 'just' the right height for bench resting.




Well, I guess one reason is because at my old "range" (below) it had a space to sit at 3' from the muzzle and it became habit!?! :roll:

Seriously, because I can read it at that distance without having to get up and go look every shot when I'm testing a string. And it works fine there :wink:

(Oh, and I'm less likely to shoot it at only 3' away....:lol:)

First002.jpg
 
I had a chroney back in the 90's worked pretty well too with only a few failures to read, overall was happy with it . It met it's demise when I tried to see what my shotgun reloads were doing. A stray No3 pellet went straight into the screen Duh!
 

Latest posts

Back
Top