SRH scope rings

wy_nott

Bearcat
Joined
Dec 9, 2014
Messages
2
I hope this doesn't show up twice. I'm new here and need some help. My SRH 44mag 9.5 barrel came with kd 71 rings about 20yrs ago. What size tube fits in these? The Ruger pdf chart made no sense. Also, what scope do you recommend? Deer hunting with all shots 100yds max. I'm 6'1" with regular arm length if that matters for eye relief. Thks
 
Welcome to the Forum, and sounds like you got yourself a very nice hunting firearm...as noted above, the standard rings are 1 inch diameter, and will work with MOST scopes, and as noted above the EER (extended eye relief) can be seen at arms length, so hold up any scope you may be looking at and at arms length look/see just what YOU can see...the more power in any scope, the MORE vibrating and bouncing (wiggle) around you will see,hard to hold one STEADY, so most folks use one that basically has the cross hairs ( or again other choices may be had) and in a 1x or 2x,, when you get to some of the red dot type optics, they call for a 30MM ( larger) rings, so you either have to get another larger,30mm Ruger style set of rings or buy one of the newer rail type bases, that will mount on the Super Redhawk, then you can use ANY make or form of rings you may need...so keep in mind they MUST be for the Super Redhawk, using the off set front & rear (front ring is higher, the rear is lower) there is a 'step'.
Good luck and happy hunting..................
 
Thanks for the replies. Looking at a Leupold M8 2x. Probably gonna get it. My eyes need a little magnification, I think. I've never had a red dot. I own several Ruger's and like them all.
 

Latest posts

Back
Top