SR9c 10rd magazines

[UserM4]

Is there anywhere else besides MidwayUSA that carries the 10rd stubby mags for SR9c's? $39.99 seems really steep imho. Thanx guys.

 

[krtsr9c]

I can find SR9 (17 round) clips as low as $24.99 but the 10 round all I can find is $39.99. I guess we can use the 17 round for reload. That is if we want to conceal carry extra mags. But I think I will stay with 10+1 for conceal and use the 17 rounds for range. I will keep an eye out and keep informed if I find anything!

 

[UserM4]

Thank you sir! I did notice that my gun came with a Ruger registration card that, when completed online, they give you 20% OFF at www.shopruger.com. That put the mags at $33.60 a piece.

 

[jhearne]

I think if you can find the 10 Round SR9 (Full Size) mags, you can swap the body/bases to fit the SR9c. A couple guys here did that. You buy the 10 Round mags with long SR9 bases. You buy a couple of the finger extension bases from shopruger.com and then swap them out. I think you save a few bucks, and if you do the 20% off you save a bit extra too.

Josh

 

[Texasgunner]

I think if you can find the 10 Round SR9 (Full Size) mags, you can swap the body/bases to fit the SR9c. A couple guys here did that. You buy the 10 Round mags with long SR9 bases. You buy a couple of the finger extension bases from shopruger.com and then swap them out. I think you save a few bucks, and if you do the 20% off you save a bit extra too.

Josh

Thats what i did 8)

 

[krtsr9c]

I also agree with jhearne and texasgunner, that sounds like an alternative, but I found on Cheaperthandirt.net they have the SR9C finger extensions for $5.58 a peice. Sounds like once this info gets out, that web site will be sold out of them! . I think I will pass, since I am saving up for my CCL.

 

[krtsr9c]

I took a look at the 10 round mag for the SR9 on the Ruger website and it looked bigger than the one for the SR9c. Is this true or just an illusion?

 

[jhearne]

Physically the assembled 10 round mags for the SR9 are bigger, but only because the base plate is an inch or so tall. Otherwise the metal bodies are the same....it's a cost saving feature to let Ruger use the same 10 round mags and save that design cost.

Josh

 

[buckshotshorty]

If you can find an inexpensive 10 round mag for the SR9, it will work. I found one for the $24, removed the base plate which is an extended piece, and put on the flat plate that came with the SR9c (which I removed to put on the pinky extension). It fits perfectly.

This is it with 10 rd SR9 mag:

 

[owsi26]

Thank you sir! I did notice that my gun came with a Ruger registration card that, when completed online, they give you 20% OFF at www.shopruger.com. That put the mags at $33.60 a piece.

When did you purchase your SR9c? If you don't mind my asking. I checked my box again and I did not find such a card. Bummer......

 

[Anonymous]

I just purchased an SR9c, and had the card in my box. The website for registration is http://ruger.com/newowner

 

[UserM4]

Yeah, you don't need a card, just your S/N on the gun and the info from your box.

 

[krtsr9c]

the 20% off discount is good for only a limited time once you register. I got mine SR9C 5-21-10 and expires 8-1-10, guess i need to use it before it expires. Buckshotshorty where did you find your SR9 10 round mag, locally or online? I looked online and all I could find is the SR9 17 round mags and never seen the 10 round mag for the SR9. (I did find the SR9c 10 round mags, but at $42.99 each) I did find the 17 round SR9 for $24.99 at Budsgunshop.com

 

[UserM4]

Received my short 10rd mags from Ruger today. Paid $147.90 shipped for 4 mags which came out to $36.98 each. I'm not complaining I guess. Next time I'll be picking up some 10rd SR9 mags with the sleeves.