sp 101 trigger

[TreeDoc]

Picked up a sp DAO snub for a song the other day. It is an older one, 90's model. As usual it had a heavy poor trigger. Ive done an IBOK treatment on the inside and replace the hammer spring for #12, radius the trigger. Much, much better. Changed out the return spring with an #8 but changed back to stock, because reset was to long and not as positive as I would like. Finally the question. It feels like the trigger is "raspy" on the return, should I sand the trigger or file the frame. Weight of trigger is fine, want it smooth. Thanks

 

[GP100man]

TreeDoc ,you where almost there !!

The well the trigger returnspring is in will be ruff .

Disassemble the trigger group completely & polish it with a 13/64 drill bit & fine lappin compound , clean it good & this is 1 spot I do use a quality synthetic grease.

Also the plunger that looks like an arrow head smooth it up & the mating surface on the cyl latch ,but don`t remove much !!

 

[TreeDoc]

You the man, will try this evening, Thanks GP100man