G. Freeman":3k8ymxtg said:
Hi Flatgate, what is a transfer bar pinch?
That's when the transfer bar "takes" the energy from the hammer fall.
My simple test: Unload gun. Check to see it's unloaded, again......
Cock hammer, squeeze trigger and maintain trigger pressure after the hammer has dropped. Slowly release the trigger while watching the hammer. If the hammer moves forward as the trigger is released (which pulls the transfer bar down) then the transfer bar is "pinched" between the hammer and cylinder frame.
A bit of adjustment to the depth of the "relief" on the face of the hammer will rectify the clearance issue.
As usual, Just My Humble Opinion,
flatgate