Sbh Hunter scope base

[craveman85]

I was wondering if the rib on the Blackhawk Hunter barrel can be easily removed. I'm in the process of getting my first handgun and it's going to be a 44 mag for deer/black bear. I'm not a fan of the rib on the barrel but the regular 7.5 sbh has the square trigger guard that I really don't like.

 

[JCW64]

The rib is integral with the barrel and will not come off on the Hunter model. That is what makes it a great setup for a scope.
Your best bet is to buy the stainless 7.5” Super and change the grip frame to a bisley style or traditional Blackhawk XR3-red grip frame if you do not care for the square back design or scope setup.

 

[David Bradshaw]

I was wondering if the rib on the Blackhawk Hunter barrel can be easily removed. I'm in the process of getting my first handgun and it's going to be a 44 mag for deer/black bear. I'm not a fan of the rib on the barrel but the regular 7.5 sbh has the square trigger guard that I really don't like.

******
Take a hard look at the Super Blackhawk Silhouette model, 10-1/2” barrel, Maximum ejector. Retails $860, a Franklin less than the SBH Hunter. The 10-1/2” barrel increases velocity, reduces recoil, and provides a longer sight radius. Introduced in 1983 as the KS411N, the “Silver Hornpipe” set a World Revolver Record in IHMSA Handgun Silhouette on its first outing, toppling 140x160 steel animals from 50 to 200 meters, across four categories of competition. Taken afield, it is no slouch.

Model number for the stainless “Silver Hornpipe” is #0806. In blue, it retails $830 and is #0807.
David Bradshaw

 

[daveg.inkc]

Excellent advice Mr. Bradshaw. I have one and it is very accurate. Recoil is less than 7.5” models. With a scope, practice, 150 yrd shots are possible. Mine is stainless. I want a blue one to match it now.

 

[craveman85]

I'll probably just get the Hunter. I can live with that rib I guess then get something else for looks. Those 10.5" ones have that damn trigger guard too. Otherwise I'd probably be getting one of them.

 

[daveg.inkc]

One thing you can do,, when you shoot it, put on Pachmayr Presentation grips. That is what mine is sporting. The rubber grip covers the square guard. Makes shooting top loads more comfortable. What is it exactly you dislike about square guard?

 

[craveman85]

I find it ugly and I have large hands so I'll probably catch it on my knuckles occasionally. I don't like the looks of those grips either. I plan on making my own grips from antler. I'm pretty particular about looks sometimes.

 

[daveg.inkc]

I carry extra grips in each revolvers case, so I can change during a firing session. The Presentations keep my knuckle from hitting guard.

 

[DeletedMember275]

You could also install the round trigger guard Hunter grip frame on a regular Super, and then sell the Dragoon-style grip frame to recoup some of your expense. Personally, I don't think I could abide the looks of a Hunter unless I had a scope mounted on it.

 

[craveman85]

Swapping frames may be difficult. I'm assuming the serial number is on the frame. I'd have to have them all put on my permit, swap the parts, then try to sell the mix and match one and have it removed from my permit.

 

[daveg.inkc]

You don’t have to go thru all that. Serial number is on main frame. Main body. You can swap and change the grip frame. Ruger shooters do it all the time. Biggest problem you may incur is the small screws. 3 different sizes, 5 screws per frame.

 

[Dan in MI]

http://www.rugerforum.com/phpBB3/viewtopic.php?f=3&t=267601

 

[98Redline]

Just go ahead and get the Hunter model. I can't say that I have heard of anybody getting a Hunter model and being sorry with the purchase or having a difficult time hitting with it. They have typically been some of the most accurate single actions that Ruger has produced.

The extra rib on the barrel, while it does detract from the classic lines of the SRH does a great job of helping tame the muzzle rise.

My Bisley Hunter is my favorite hunting revolver bar none.