SBH cyl. throat diameter measure

[GSP7]

Kinda want to do a little survey.

What do your SBH cylinder throats measure?

And OM or NM or maybe year of manufacture?

Thanks Rick

 

[Snyd]

My 2005 SBH Bisley Hunter 45 Colt were .451 - .451.5 ish I think one was closer to .4505. I reamed em all to .4525. Much mo-betta now.

 

[GSP7]

Good, keep them coming

 

[slowrider]

Wait a minute. The Super Blackhawk only comes in 44 Mag. Mine measure around .431 (1966 old model)

 

[Ia.redneck]

I have a SBH Hunter made Jan of 04 and the cyl throats are .431 and barrel is .430

 

[Snyd]

Wait a minute. The Super Blackhawk only comes in 44 Mag. Mine measure around .431 (1966 old model)

Special run of them commissioned by Lipseys back around 05. 600 or so plow handles and about 300 Bisleys. All Hunter Models, non-fluted, non-roll marked cylinders as well.

 

[Enigma]

Both of mine run .432"; a 7-1/2" Bisley and a very well-used 4-5/8" plowhandle. Honestly, I don't know what year either one was made; I'd have to dig them out of storage to check...

 

[slowrider]

Wait a minute. The Super Blackhawk only comes in 44 Mag. Mine measure around .431 (1966 old model)

Special run of them commissioned by Lipseys back around 05. 600 or so plow handles and about 300 Bisleys. All Hunter Models, non-fluted, non-roll marked cylinders as well.

I stand humbly corrected.

 

[JED45]

I have a 1958 OM FT .4325-.4330, 2 1972 OM SBHs .4325-.4335, .4315-.4320 and a SRH .4325-.4330.


JED45