Help Support Ruger Forum:

N

NikA

Hunter From Yrisarri, NM- high in the Manzanos
Joined
Last seen
Messages
2,049
Media
1
Reaction score
861

Latest activity Postings Media About Post areas

    • N
      NikA replied to the thread SRH TRIGGER WEIGHT.
      A 7lb trigger pull for a DA revolver is in competition shooting territory, I'd be extremely surprised if you could even find a...
    • N
      NikA replied to the thread No. 1 firing pin issue.
      Guessing a tolerance stacking issue when the parts are cold. Thinking the synthetic stock must be aftermarket, how much clearance is...
    • N
      NikA replied to the thread 45 Colt.
      Curious if this confusion has ever personally affected you? Caused someone close to you to think or purchase the wrong thing? (If so...
    • N
      NikA replied to the thread Powder measure opinions.
      I made mine out of a beer can. Helps to have a pattern (think I had an example from a different manufacturer and traced it), but I'd bet...
    • N
      NikA replied to the thread Ruger Redhawk 357 8 round 2 3/4" front sight.
      I think Dawson Precision might have what you're looking for. I know they had replacements for the similar dovetailed GP revolvers.
    • N
      NikA replied to the thread Safe loads for the Cowboy 45 Special.
      I don't think this is correct. The SAAMI document that I have with chamber dimensions and pressure test data lists 4 recognized +P...
    • N
      NikA replied to the thread P94 comped slide mod.
      Just watched a video on the Sig system you are suggesting duplicating. In that system, the precision fit between the barrel and the...
    • N
      NikA replied to the thread P94 comped slide mod.
      The way this is normally accomplished as an aftermarket add-on is to thread an extended barrel and use a threaded comp. Does the 94...
    • N
      NikA replied to the thread M77 question.
      Have you had it out of the stock? I've seen caliber markings from gunsmiths that end up below the wood line. If it was done...
    • N
      NikA replied to the thread Safe loads for the Cowboy 45 Special.
      @vlavalle, .45 Cowboy Special is a cartridge case specification, a case with .45 Colt rim dimensions cut to .45 ACP length...
    • N
      NikA replied to the thread 10/22 barrel removal.
      If it doesn't slide off when the screw block is removed, I would try a little heat. Think warm to touch, not glowing. IME they are tight...
    • N
      NikA replied to the thread Bullet find today.
      I posted the relevant statute. Supply a source that supports your argument if you have such. Don't bother accusing me of coming up...
    • N
      NikA replied to the thread Extractor on super wrangler.
      The cylinder freewheels in both directions when the loading gate is open? The hand is the piece of the revolver action that sticks...
    • N
      NikA replied to the thread Safe loads for the Cowboy 45 Special.
      @TheTexasRAT, have you measured your Redhawk to determine what the max OAL is for your setup? I seem to remember that SAAMI .45 Colt OAL...
    • N
      NikA replied to the thread Gunsmith tools.
      I'm not sure what you mean by proprietary here, they are normal 1/4" bits with extra features (end knurling and ball detents vs...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…

Latest posts

Top