Dave Schwaab
Single-Sixer
- Joined
- Nov 2, 2014
- Messages
- 128
So, if the hammer was in the fired position when you forced the bolt back with the cleaning rod, I'm thinking you could have bent the Hammer Pivot Pin, maybe even did some damage to the Sear or Disconnector Link.
Try comparing those parts to the ones in the good gun.
Looking at the Instruction Manual, that's the best possibility that I can see happening.
Hope this helps.
Dave
Try comparing those parts to the ones in the good gun.
Looking at the Instruction Manual, that's the best possibility that I can see happening.
Hope this helps.
Dave