MK II 22/45 upper on MK III Standard Lower ??

[Hylander]

I want to get a MK III Standard Lower for my MK II 22/45.
Any issues putting an MK II 22/45 upper on an MK III Standard Lower
Fitting issues?
Compatability issues ?
Direct swap?

 

[Dan in MI]

I've not messed with MK-III's much, but I'm 99% it's just a swap.

Go to Wirthwien Guns website the answer will be there. I'm pretty sure Lee just posted a frame info chart on exactly this.

Edit - Yes

Ruger-Frames

Information to identify and understand Ruger Mark Series Pistol Frames from 1949 (standard) to Todays Mark IV models

www.wirthweinguns.com

 

[Hylander]

Thanks,
Looks like it should be a straight swap.

 

[Mobuck]

I had to do a LOT of fitting to mount a series 3 standard upper on a series 3 22/45 grip frame.

 

[Dan in MI]

I've put a bunch of III uppers on II lowers. Sometimes a 22/45 to standard will require a little attention to the front end hook. Apparently the 22/45 hook isn't quite as deep as a steel frame, so they can be tight.

 

[fallsinhole]

22/45 upper to a metal frame is not interchangeable without fitting of the front lug! Takes a bit of work !!

 

[Dan in MI]

22/45 upper to a metal frame is not interchangeable without fitting of the front lug! Takes a bit of work !!

Sometimes. I've had some swap right over and others take a little bit.

 

[Hylander]

If it needs fitting, is it a pain to do?
Hand tools do?
I am pretty handy doing my own work.
Just don't want to spend a few hundred dollars for a frame and it not work out.

 

[Dan in MI]

Yes, hand tools if required. It is just the thickness of the upper, or the gap in the hook. Whichever you prefer to work on.

 

[Rimfire Sports]

I want to get a MK III Standard Lower for my MK II 22/45.
Any issues putting an MK II 22/45 upper on an MK III Standard Lower
Fitting issues?
Compatability issues ?
Direct swap?

No issues putting the upper on the Mark III frame but you'll need Mark III magazines for the Mark III lower.