45 colt New Vaqueros

JPGLSG

Blackhawk
Joined
Jul 27, 2013
Messages
932
Hondo44 and I have been emailing back and forth regarding the Ruger New Vaquero that were manufactured from 2005 to 2009.

I was telling him that over the past 3.5 years while I was collecting as many large frame Vaqueros as I could afford, I was also keeping track of the early New Vaqueros that were still being case colored on the cylinder frame. I was telling him of how few of these guns have come to market over that same 3.5 year period. Jim thought that between late 2005 through 2009 approximately 70,000, New Vaqueros were produced. Possibly 35,000 or more were stainless steel, which would leave the other 35,000 or so, case color and blue. All in the various barrel lengths, 7.5, 5.5, 4 ¾.

I was telling him, in that time period I have seen the following on the market. 4 of the 7.5” brl., 5 of the 5.5” brl., and 3 of the 4 & ¾” brl. I know of 3 Forum members that that have a 5.5” model, and have seen a pair of 5.5” models on the Cow Boy Action Shooting site for sale, as well as a 5.5” in 357cal. If there is another 34,982 guns out there why don’t we see more of them on the market for sale?

I could hold out no longer I had to have my three.

2v9x401.jpg
 
I'm going to hazard a guess that it was not 50% stainless / 50% blued CCH but maybe more like 75% stainless. Just a guess on my part.
I've focused on the Stainless since I had at least one (original) Vaquero with a bad (lost) CCH finish. Stainless is just more durable, even if the CCH is prettier.
I wonder if others had the same thoughts?
Terry T
 
I only have three of the original Vaqueros. A pair of 5 1/2" .44 mag. And one .44-40
5 1/2". All of mine are stainless. In the last five years,I have not seen a single color case/blued one for sale but I have not been searching for one either.
JPGLSG , your three are excellent. SWEET !!!
 
Terry T said:
I'm going to hazard a guess that it was not 50% stainless / 50% blued CCH but maybe more like 75% stainless. Just a guess on my part.
I've focused on the Stainless since I had at least one (original) Vaquero with a bad (lost) CCH finish. Stainless is just more durable, even if the CCH is prettier.
I wonder if others had the same thoughts?
Terry T

Terry

You may be right on your guess as not many have been seen. Don't know how true it is but I was told that the case color process was more durable to ware on the new models than the OMs. Don't know what change they could have made its all dye on bare steel.

JP
 
I've yet to see an OM in the wild except a custom job. Mine is a NM original Vaquero (case colored) 5 1/2" .45 Colt. Probably you don't see more for sale... because people like them and are holding on to 'em :) . I know I'll be keeping mine until my kids go through my stuff after I am gone....
 
Rclark said:
I've yet to see an OM in the wild except a custom job. Mine is a NM original Vaquero (case colored) 5 1/2" .45 Colt. Probably you don't see more for sale... because people like them and are holding on to 'em :) . I know I'll be keeping mine until my kids go through my stuff after I am gone....

R-Clark.....Go look at your gun and tell me/us does it have a two or three digit prefix serial number, xx-xxxxx or xxx-xxxxx ??

JPG
 
Those are the 'custom' OM revolvers I was talk'n about ;) . My NM original Vaquero is of course xx-yyyyy. My NM New Vaqueros are xxx-yyyyy. <sigh> I know I probably shouldn't bring it up as we knew what you meant... but it bugs me sometimes... OM refers to three screw Rugers built before ~'72. The NM is post '72 two pin safety transfer bar Rugers.... Just common Ruger terminology. Therefore both the original Vaquero and New Vaquero are NMs :) .

Nice set off revolvers you have there!
 
One thing everyone should remember! All Vaquero are New Models even the old model Vaqueros are New Models.
 
Thanks Fellows, I'll get all this old models, new models and new model new Vaquero terminology straight one of these days.
 
Ale-8(1) said:
Aw, heck . . . let's further confuse the matter . . .

http://www.rugerforum.com/phpBB3/viewtopic.php?f=18&t=218555&p=2183726#p2183726

;) ;) ;)

I am fighting off the urge to PM him with all kinds of trade offers with some NM large frame guns to see if he might part with those. Or dollars, tax season cometh !!!!!!
 

Latest posts

Back
Top