.22 LR chain fire

oscar243

Bearcat
Joined
Oct 28, 2012
Messages
30
A friend asked me if I ever heard of a .22 single action handgun setting off all 6 rounds of .22 LR at once. He had a friend tell him it happened to him. It was a single-six like handgun, possible a Heritage make. He cocked the hammer, pulled the trigger, and all 6 cartridges went off at once. Anyone ever heard of this happening? Personnally I would have liked to have seen it!
 
Can't think of any way this could happen on a cartridge revolver. Now a cap and ball like a Ruger Old Army can get interesting!
 
Nope never, can't even think of a way it could possibly happen, have to say someone is pulling the wool over your eyes. :P
 
Being that there's one firing pin and the cylinder has to rotate, I find this hard to believe in a rimfire, or even a centerfire, handgun. As noted, I'm not talking about black powder revolvers.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
I don't see how that could physically happen but I personally would not have wanted to see it.
 
Might all go off if you threw the gun in a bonfire and they cooked off. :wink: But that's the only way I could see it happening.
 
WELL NOW.....one time I saw a Colt SAA 45 that could go full auto and dump a cylinder full before you could blink. I know how that happened, but a 22LR sixgun dumping all the rounds at once is a bit of a stretch for my vivid imagination.
 
Thanks everyone for your replies. I too can't see how this could happen. I too have only heard of it happening with a black powder pistol. I'll call my friend and tell him his buddy is full of B.S.
 
bentblade said:
Didn't American Arms make a small bp revolver at one time?

Yep, and they still do: http://northamericanarms.com/firearms/cb.html

I've got one, and it's a hoot. It's also pretty much useless, unless your goal is to shoot your own finger off. :shock:

I've fooled around with the NAA Companion, several ROAs, and some Italian BP revolvers. I've never had a chain fire, but it's always possible.

To have "all six" go off... that might be a stretch, unless there was only one cap in place.

Come to think of it, the Companion is a "5-shooter," anyway. 8)
 
bentblade said:
Didn't American Arms make a small bp revolver at one time?


YES, you're right they did, and they may still make those. It's possible to happen with a black powder gun, but a cartridge revolver? I don't think that's even within the realm of possibility. :roll:
 
re: "one time I saw a Colt SAA 45 that could go full auto and dump a cylinder full before you could blink. I know how that happened".......are you going to tell us or should we speculate? I don't believe such is possible.
 
m657 said:
re: "one time I saw a Colt SAA 45 that could go full auto and dump a cylinder full before you could blink. I know how that happened".......are you going to tell us or should we speculate? I don't believe such is possible.
With a worn/sharpened hammer mounted firing pin that pierces primers, the blow back can sometimes be enough to cause the hammer to go back to full cock and make the revolver run like a raped ape.

It is also possible to have a BP revolver go full auto when the nipple hole opens up enough to do the same as above. Very interesting to see it happen.
 
Kanook said:
m657 said:
re: "one time I saw a Colt SAA 45 that could go full auto and dump a cylinder full before you could blink. I know how that happened".......are you going to tell us or should we speculate? I don't believe such is possible.
With a worn/sharpened hammer mounted firing pin that pierces primers, the blow back can sometimes be enough to cause the hammer to go back to full cock and make the revolver run like a raped ape.

It is also possible to have a BP revolver go full auto when the nipple hole opens up enough to do the same as above. Very interesting to see it happen.

Have you actually seen this happen? As unlikely as this is to happen one ONE cylinder, just what are the odds on such happening on all cylinders sequentially without a break? It would seem the mechanical failure initiating the first cylinder, then would require a separate and statistically even less likely 2/3/4/5/6 failure. I've never read about this, heard about this, had old time buddies report this, nor suspect it could/would happen in the various braces of SAA Colts I've had, including a pair from circa 1896 that I shot regularly in cowboy matches for nearly a decade.

But you have raised an interesting question.

Please elaborate.
 
here's the Webley-Fosbery Automatic revolver

http://www.youtube.com/watch?feature=player_detailpage&v=Va6KHE0jEFc

http://www.youtube.com/watch?v=X8UmQCbZXVo
 

Latest posts

Back
Top