Ruger No. 1V Barrel Dimensions

Niederlander · Mar 16, 2020

Hello! If someone here has a Ruger No. 1V, could you measure the diameter just in front of the receiver, and then about 5" in front of the receiver? I'm looking at the feasibility of a project and need to know if a scope mount will work. Thanks!

rdickey · Mar 18, 2020

do you still need those measurements? Ron

dlidster · Mar 19, 2020

I have a scope on the rifle and did not remove the forearm so these measurements aren't as precise as they could be . . .

1.145" in front of receiver
0.965" five inches from front of receiver

Niederlander · Mar 21, 2020

rdickey said:
do you still need those measurements? Ron

Yes, exact measurements would be helpful. Thanks!

Niederlander · Mar 21, 2020

rdickey said:
do you still need those measurements? Ron

Yes, exact measurements would be helpful. Thanks!

Niederlander · Mar 21, 2020

Does the 1V barrel have a parallel breech area and then a straight taper?

Chief 101 · Mar 23, 2020

on my 1V 26" 204 Ruger ss barrel the measures are 1.160" at the receiver and 9.55" at 5 inches. The breech area is straight for about 2.5 inches past the shoulder. It appears to be straight taper starting at about 5 inches from shoulder.

Niederlander · Mar 30, 2020

Thank you! That's what I needed to know!

Ruger No. 1V Barrel Dimensions

Help Support Ruger Forum:

Niederlander

Bearcat

rdickey

Bearcat

dlidster

Single-Sixer

Niederlander

Bearcat

Niederlander

Bearcat

Niederlander

Bearcat

Chief 101

Hunter

Niederlander

Bearcat

Similar threads

Latest posts