RugerForum.com

This is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.
It is currently Sun Oct 13, 2019 11:48 pm

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Pasco tool
PostPosted: Wed Jul 10, 2019 2:02 pm 
Bearcat

Joined: Thu Jan 23, 2014 5:09 pm
Posts: 36
I would like to purchase a Paco Kelly Accuriser tool. I just want to improve accuracy. Which tool should I get and who has them for sale? I called some of the vendors on their websight but none of them had it.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 5:37 pm 
Blackhawk

Joined: Wed Nov 02, 2005 2:01 am
Posts: 587
Location: South West Indiana
I use a Neil Waltz 22 sizing die, works great.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 6:10 pm 
Bearcat

Joined: Thu Jan 23, 2014 5:09 pm
Posts: 36
Single Sixer tell me more about it.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 6:27 pm 
Blackhawk

Joined: Wed Nov 02, 2005 2:01 am
Posts: 587
Location: South West Indiana
The die threads into a loading press, it comes with a shell holder and 3 inserts round nose, hollow point, and the one that looks like an Eley nose. When you size it is making each round the same diameter and shaping the nose.
I like it because it makes each round the same where its real hard to do that with a Paco tool and a hammer.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 7:03 pm 
Bearcat

Joined: Thu Jan 23, 2014 5:09 pm
Posts: 36
Does it improve accuracy?


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 7:35 pm 
Blackhawk

Joined: Wed Nov 02, 2005 2:01 am
Posts: 587
Location: South West Indiana
Yes it improved accuracy. And you can make some hollowpoints that are really good on squirrels.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 7:39 pm 
Blackhawk

Joined: Wed Nov 02, 2005 2:01 am
Posts: 587
Location: South West Indiana
Here's a review
https://www.portercalls.com/neal_waltz_die.htm


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 9:24 pm 
Hunter

Joined: Sun Jan 20, 2008 10:18 am
Posts: 2586
Location: Orange County, CA
Try asking on www.leverguns.com. They advertise them.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Wed Jul 10, 2019 10:53 pm 
Bearcat

Joined: Thu Jan 23, 2014 5:09 pm
Posts: 36
Single Sixer how much does the tool cost?


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Thu Jul 11, 2019 5:06 am 
Blackhawk

Joined: Wed Nov 02, 2005 2:01 am
Posts: 587
Location: South West Indiana
Fla Trooper 265 wrote:
Single Sixer how much does the tool cost?

It's all in the review link above. Including ordering info.

$145 I think.


Top
 Profile  
 
 Post subject: Re: Pasco tool
PostPosted: Thu Jul 11, 2019 5:59 am 
Blackhawk

Joined: Wed Jul 30, 2008 11:51 am
Posts: 657
Location: Coleman, tx
I have one of the second designed dies from Paco called the "nasty nose" tool. It has a blunt point and a hollow point punch. One end makes 223 and the other 224 IIRC. It was the hammer type, but I was never comfortable whacking a die with a live round in it so I use a bench rest arbor press. It puts the same pressure on the die each time you use it. I have used the modified rounds on skunks and coons and one rattler so far. The rounds were accurate and devastating in the damage to the snake and coon. I shot the skunks in the midsection so they would run off and die some place else because I have had too many head shot skunks spray when headshot. Just because a die has a feature for a mallet does not mean you can not use a press.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group