Fox Mike said:What barrel length model do you have? I ask because Jeff Quinn said that the 5.5" barrel model he tested had higher velocities than the others.
AKDRSS said:Fox Mike said:What barrel length model do you have? I ask because Jeff Quinn said that the 5.5" barrel model he tested had higher velocities than the others.
To many variables to consider Jeff's limited review as the final truth, especially if you reload. Sometimes even "identical" revolvers will give wildly different velocities.
Smoothness of the bore, cylinder gap, slow or fast powders, all these and more come into play which might effect the velocity.
Mine has same issue.mhblaw said:Shooting mine over the weekend I had a problem with the base pin backing out after 2 or 3 shots. Screws on base pin latch are tight and seems to engage firmly, but after a couple of shots, backs out again. Of course this ties up the gun as the base pin cannot push the transfer bar out etc. Have an e mail in to Kelye at Belt Mountain to see if their single six locking base pin will work in the single seven.