Need a couple .416 bullets

[artey]

I need a couple cheap hornady or speer .416” bullets. I need to test fit them in some brass to be sure they chamber before buying a mold. Will pay.

Thank you for your help.

 

[Shotgungibbs]

Hey Artey! I don't know what I have in .416 bullets, cheap or not. However, I will send you a couple or three if I hace different companies bullets. PM me your address, & I will get some out to you. It will take me several days to get to the PO, as I work everyday this week through Friday.

 

[crash1987]

I can help you out also, I do have some 400gr Hornady softs, along with some 400gr swift a-frames, 400gr Nosler partitions, and solids, 400gr barnes solids, along with some cast, NOE 350 and LBT 400 gr LCFN. Maybe even some others, not sure at the moment. Let me know your wants and I can get a few out to you
Crash

 

[Cal30 1906]

I could help you out if you were looking for. 423 bullets AKA .404 Jeffery.

 

[artey]

Thank you guys. Shotgungibbs was kind enough to to send me a couple which is all I need to test fit cartridges in chamber.

 

[Joe Chartreuse]

OK, I admit ignorance RE the .416. Are we talking handgun or long gun. Never heard of the caliber except for the Remington.

 

[Cal30 1906]

OK, I admit ignorance RE the .416. Are we talking handgun or long gun. Never heard of the caliber except for the Remington.

The 416 Rigby started it all.
There are a few 416 cartridges out there other than the common ones.

 

[artey]

I have a custom barreled Remington Hepburn. Chambered in 405 Winchester with a faster twist barrel. Groove diameter is .416” and my chamber should fit that sized bullet but just barely. I need a couple bullets jusy to be sure my cartridges will chamber with my brass before I order a custom
Mould.

 

[Shotgungibbs]

Your .416 bullets are on the way!