Firing pin removal RAR 22lr

[Chief 101]

Title says it all, how do I get the firing pin out of RAR rimfire...? Thanks

 

[9x19]

Bolt strip

1. Hold bolt body firmly and rotate bolt handle clockwise to lower striker

2. Press end of shroud against firm surface while pressing out bolt pin, easy to do.

3. Shroud and spring will come off, then remove extractor spring by pulling outward on extractor and prying spring up with very small screwdriver blade, spring is then rotated off bolt freeing extractor and striker.

4. To get it back together assemble striker and bolt handle, slide onto bolt and reinstall extractor and extractor spring, hand pressure will easily do this, then align shroud with spring inside and place over bolt handle making sure striker is at bottom of cocking cam. Press end of shroud on firm surface and insert pin. Hold bolt body and rotate bolt handle counter clockwise prior to placing bolt into rifle.

 

[Chief 101]

I got it, just had to look at the diagram in the manual. Thanks
It was too siimple

 

[9x19]

You're welcome

 

[hittman]

What? :?:
They have manuals for these things? :lol:

 

[Chief 101]

What? :?:
They have manuals for these things? :lol:

Yes they do, its in the box in your garage shelf in storage waiting for the time when the box is worth $500