AR Parts for sale - All items back on Sale or Best Offer

[papaSR9]

I will entertain any reasonable offers on the remaining items.

I started two AR builds near the end of last year before I got short strawed after a company merger. Since I am still looking for work that project is on hold indefinitely so I need to sale some of the key components for one of the builds.

Part of this will help fund the trip to Fort Jackson to see my son Graduate from BCT next week. I have a wonderful girlfriend who has a great job but I also still have my pride.

All are NIB and have never been installed. I prefer local meet up (extended Metro Atlanta area) but I can ship some of the items. Buyer pays for shipping. Payment is cash for meet up or Postal M.O. if shipped. Offers will be considered but not guaranteed to be met.

Contact me directly (PM) if you have any questions/want to buy. First contact, first served.

These are great for your own new build or as a back up component for an existing one.

Magpul Gen 1.1 MIAD Grip (Black) 33.00

Magpul CTR Milspec Stock (Black) 60.00

BCM Mil Spec Buffer Tube Kit. Original in package w/spring, castle nut, plate and H1 weight, 60.00

BCM Gunfighter Mod 4 Ambi Charging Handle 60.00

Bad Ass Ambi Safety Selector (Black) Normal/Short 55.00
Specs - http://shop.battlearmsdevelopment.com/BAD-CASS-SA-COMBAT-AMBI-SAFETY-SELECTOR-AR15-AR10-SEMIAUTO-BAD-CASS-SA.htm

Magpul BAD Lever 25.00

Magpal ASAP Sling Plate 15.00

BCG Phosphate Rainier Arms - 99.00 - Sold pending funds
Specs - https://www.rainierarms.com/?page=shop/detail&product_id=3759

Carrier:
Full Auto Carrier
Heat Treated

Bolt:
Shot Peened
Heat Treated

Extractor:
Stamped
Shot Peened
Heat Treated

Extractor Spring:
Chrome Silicone for Longer Life
Black Insert as per current Mil-Spec
"O" Ring is high temp resistant dark brown

Extractor Retaining Pin:
Precision Machined
Precision ground to diameter
Precision ground to length
Heat Treated

Firing Pin:
Machined and then precision ground for accuracy
Heat Treated

Gas Key Bolt:
Precision manufactured in house with extra deep knurling
Grade 8
1200 degree locking patch is factory applied to threads to help insure long lasting tightness

Gas key:
Hard Chrome lined gas tube as per Mil-Spec
Bolts installed to proper torque
Staking on both sides of both bolts

Cam Pin:
Precision machined
Heat Treated

Firing Pin Retaining Pin:
Precision bent
Precision cut to length
Heat Treated

Gas Rings:
Stainless Steel per Mil-Spec

Ejector:
Precision machined
Heat Treated

Ejector Spring:
Chrome Silicone
Precision ground ends

Ejector Retaining Pin:
Precision cut to length
Hard Chrome Plated

 

[Hawk-in-Wi]

congratulations to you and your son, sure hope you can do the family day that they have
if you go early, you can get your entry pass early , that way you don't have to set in line at the gate , also give yourself plenty of time to get in and out as its a really busy place
at least it should be really nice this time of year , we were there in Aug 2011 for our son's

I tried to check out your links but neither would work for me

 

[papaSR9]

Thanks Hawk, I fixed the links.

We are going for both the Family Day and Graduation. When you say 'go early'; does that mean a day early? We plan on getting to the gate early in the morning for Family Day so as to beat the crowd and stay inside the Fort during the whole day as there is a Company dinner. My ex-wife is traveling separately with her mother, it would be good for her if she can leave for part of the day and then come back. I will be posting a separate thread about the upcoming event. What was your son's MOS?

I fixed the links.

 

[sheep.dog]

pmed you.

 

[papaSR9]

pmed you.

Responded to your PM.

 

[Hawk-in-Wi]

Thanks Hawk, I fixed the links.

We are going for both the Family Day and Graduation. When you say 'go early'; does that mean a day early? We plan on getting to the gate early in the morning for Family Day so as to beat the crowd and stay inside the Fort during the whole day as there is a Company dinner. My ex-wife is traveling separately with her mother, it would be good for her if she can leave for part of the day and then come back. I will be posting a separate thread about the upcoming event. What was your son's MOS?

I fixed the links.

we got there the evening before family day and found the gate where they admit you for family day and graduation day , its NOT the main gate , got our pass and was good to go for the next 2 days , as for early yes , on graduation day, we where there early enough to watch the sun come up and still there was all ready a start to the lines

if your son is going home with you , you will have to sign him out , we where able to sign the papers on the evening of family day so when graduation was over , we all just got in the car and left

 

[papaSR9]

Bump - Deal fell through. Everything is back up for sale. These are below retail prices.

 

[papaSR9]

we got there the evening before family day and found the gate where they admit you for family day and graduation day , its NOT the main gate , got our pass and was good to go for the next 2 days , as for early yes , on graduation day, we where there early enough to watch the sun come up and still there was all ready a start to the lines

if your son is going home with you , you will have to sign him out , we where able to sign the papers on the evening of family day so when graduation was over , we all just got in the car and left

I checked online and found out which gates to go in. Since he is reporting to Fort Sill, the Army is going to fly him out there. If he was going to report to a base east of the Mississippi then family could take a soldier to it. Anything west the Army wants to make sure that they get there.

 

[KWYJIBO]

BCG Phosphate Rainier Arms - 99.00
Specs - https://www.rainierarms.com/?page=shop/detail&product_id=3759

I'll take this piece. PM headed your way.

 

[papaSR9]

Bump.