A fun zeroing

contender

Ruger Guru
Joined
Sep 18, 2002
Messages
31,385
City & State/Province
Lake Lure NC USA
I had to do a little work on one of my rifles. A Remington 700 BDL in .222. I had to remove it from the stock,, & clean up some gunk that had dried in the trigger & bolt. I haven't shot this gun in at least 3-4 years now. Anyway,, after I had done all this,, I knew to take it out & check the zero of it. After a few shots,, I decided to see what kind of group I could get. I pinned up this Ace,, and shot it 10 times. I know,, I know,, the average study appears that there are only 8 shots on it. But,, I counted the shots,, and then when I got home I even put it under the magnifyer. Yep,, all 10 are there. Anyway,, it was a fun way to finish out shooting it. That rifle has always been very accurate.

Acediamond222.jpg
 
Nice group :D The one caliber I don't have,,,Always looking though.
Thanks for sharing.
 
Hi Are those hand loads 222 is my favorite cal I always use 50 or 52 grain bullets I never tried 40s I have 4 differant guns and they all like compressed loads of imr 4895 I use to have a rem 722 ? 721 that would shoot 5 into a 1/2 inch all day I needed some cash so I sold Im still kicking myself

GRAMPS
 
Yes,, those are handloads. And,, in all honesty,, I have had groups even smaller than that at times. I use a Hornady 40 grn moly coated poly-tipped varmit bullet. I'm using 26.0 grns of BL-C2 powder,, over a match primer.
What got me to digging this rifle out was a two-fold affair. A good friend just traded for a Rem 788 in .222,, and was having issues with the Swift scope on it. Plus,, the exact same day he got this gun,, we both went in on a deal with another guy I know who had a bunch of .222 stuff for sale. (Can we say Karma here. We were at a gunshow,, and my one friend had gone to see about a deal on the .222 while I bumped into the other guy who asked me if I knew anybody who needed some .222 stuff.) So,, to help my friend out with his .222 I was going to use mine as a comparrison. I've owned a few Rem 788's in both .222 & .223. Excellent shooters. My current Rem 700 was a "couldn't pass up" gun at a dealer who had it in his gun shop. It's a semi-bull barrel,, Not a big barrel,, but definately a bull,, I'm just not sure what Rem calls them. Anyway,, mine had not been shot or used in quite a while,, and it had some gummed up old oil etc in the trigger & bolt. It wouldn't fire. So,,, I had to bring it back home to clean,, and after pulling the action out of the stock,, it needed a resetting or checking of the zero. I made the longest shot on an animal I've ever tried or hit with this gun. A pararie dog,, back in 2001 in Wyoming,, at 674 yds,, ranged,,. I didn't hit him with the first shot,, as I was only zeroed a little high at 100,, but I walked a few rounds into him before I connected. Still a very capable gun. It's also the gun I took my only badger with! A very accurate gun and caliber.
I like the lighter 40 grn bullets for the speed,, and I usually only shoot small varmits with it.
I know what you mean about selling one. I wish I still had my 788's in .222 and .223.
I also have a T/C Contender bbl in .222. I do enjoy the caliber,,,!
 
Hi I just dug thru my stuff I thought I had some 40 gr hornet bullets left but fresh out I always wanted to try those varment bullets so I guess I will have to get some now I wonder if they are tuff enough for cyotes ?

THANKS GRAMPS
 
Very nice shooting. You can correct me on this but I think at one time the 222 held the record for the smallest group size. Anyway that is good shooting.
 
Yes,, at one time the .222 did hold some serious records. I will say that I've had the pleasure of owning a few of them,, and shooting others. Never shot a bad one.
I don't know about the 40 grn bullets for yotes. Unless you can get picky about bullet placement. On a called in,, moving alert yote,, I'd opt for a heavier one. But to snipe one that wasn't looking for you,, and being able to place the crosshairs on the neck,, yep,, I'd use one.
 

Latest posts

Back
Top