Year of Manufacture?

EFL58

Bearcat
Joined
May 9, 2024
Messages
11
City & State/Province
Massachusetts
Can anyone tell me the year in which my Single Six was made? SN 810279, it seems to date from the late 1960s but the Ruger site isn't clear. I assume that it once had a .22 Magnum cylinder that has been lost along the way. No transfer bar conversion.

Thanks -

EFL58
IMG_2202.jpg
 

Attachments

  • IMG_2204.jpg
    IMG_2204.jpg
    315.2 KB
You sure that isn’t a 22 Mag cylinder in it now?
What’s rollmarked on the other side of the frame?
 
No...that never occurred to me and I don't have any .22 Mag ammo with which to test it, but I will find some.
IMG_2205.jpg
 

Attachments

  • IMG_2206.jpg
    IMG_2206.jpg
    206.5 KB
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Looks to be bored all the way through and with a firing pin groove, thus a .22 LR. I appreciate the help.
 
SN# 810279
The numbers listed are the first number listed that year. One less,,, puts the last gun SN# in the previous year.
1968 starts with 490279 - 824406
and
1969 starts with 824407 and since it’s the last year, EVERTHING over 824407.

Nice gun by the way…😀


1715380646022.jpeg
 
Looks to be bored all the way through and with a firing pin groove, thus a .22 LR. I appreciate the help.
Your gun would have either been shipped as an RSS5W .22 LR only, or as an RSS5X convertible.
If the cylinder doesn't have the last three digits of the serial number scratched on the front face between chambers, it left as RSS5W... The RSS5W is pretty scarce compared to the convertible 5-1/2".
Chet15
 
Your gun would have either been shipped as an RSS5W .22 LR only, or as an RSS5X convertible.
If the cylinder doesn't have the last three digits of the serial number scratched on the front face between chambers, it left as RSS5W... The RSS5W is pretty scarce compared to the convertible 5-1/2".
Chet15
I will check tomorrow but I am fairly certain that there are no digits scratched on the cylinder face.
 
Photographically, these are the best of a blurry bunch. The last three digits of the serial number are 279 (assuming that the cylinder is original to the pistol). The two "markings" circled in blue (if they are anything) could be any numbers. Am I imagining markings where there are none?


IMG_2236.jpg
IMG_2237.jpg
markings.jpg
 
Well it's sure hard to see by these pictures, but usually the numbers are a bit bigger, & done by an electric type pencil so they are not the neatest looking numbers either. These are hard to see from what I'm looking at. Someone will check in here soon I would think. There would/should be 3 numbers on there for sure, if they are there.
 
The two "markings" circled in blue (if they are anything) could be any numbers. Am I imagining markings where there are none?

Yes imagining :D
My pics aren't much better but the electric pencil markings are easy to see when cleaned up.
Cheers,
JAYDAWG
 

Attachments

  • 20231210_162532.jpg
    20231210_162532.jpg
    19.9 KB
  • 20231210_162546.jpg
    20231210_162546.jpg
    22.2 KB
Nice gun, and better to have NO numbers marked on it, than the wrong ones, and only the original packaging ,with the cardboard shipping sleeve would have all the data ( info) so that not being there, you need the factory letter...again, a keeper for sure(y)(y)
In this case, No numbers means good numbers so to speak !! Yes, a keeper for sure !! 🙂👍
 
Thank you all for your help! Feeling fortunate. I'll send for a letter.
I think that is a good idea. For only $10, you will get the official word on when that beautiful gun of yours was shipped out of the factory and where it went before it eventually became yours, and the letter even comes with a Gold Seal....🙂👍👍
 
I think that is a good idea. For only $10, you will get the official word on when that beautiful gun of yours was shipped out of the factory and where it went before it eventually became yours, and the letter even comes with a Gold Seal....🙂👍👍
Well at least you will know where it originally was shipped too anyway........as far as how many guys had it before you, who knows and who cares, as it is Yours Now........Good luck with it.....🙂👍
 
And in the letter,, you will get the actual model nomenclature, to verify what it is. Well worth it for a scarce gun. If it comes back as a RSS5W,,you will be very happy!
 
EFL58, I just noticed you are from Mass....I was born and raised there, till I met my wife there in the early 80's. She was from California and was just there a short time, but she didn't like the cold. After we got engaged, she convinced me to move here. Women have a way of doing that. But I still root for my Boston Teams. One thing for sure is that MA and CA are very similar when it comes to gun laws.... Absolutely ridiculous!! Anyway good luck with that gun of yours, and Go Red Sox! 🙂
 
It's always good to see real gun folks from the places that severely restrict freedoms come together here. :D

No offense meant,, but I always wondered if the folks who named Massachusetts, realized the spelling included a description of many politicians?
 

Latest posts

Back
Top