New from Ruger: LC Carbine chambered in .45 ACP.

Because the PC9 is so 40 years ago.
They actually made a prototype based on the PC9/4. Management said no.

To quote COFFEE POT in a conversation 4-22-2008 when I was praising him on the design of the PCs & told him that a friend had just shot both of mine & said "I need one of these in 45";

"Thanks for the kudos. I'm quite proud of that puppy myself. Tell your friend that he has no idea of the efforts I made to bring a PC45 to fruition. I had one prototype made that was so sweet you would have given up both sex and beer to have one but could never sell it to management."
 
They actually made a prototype based on the PC9/4. Management said no.

To quote COFFEE POT in a conversation 4-22-2008 when I was praising him on the design of the PCs & told him that a friend had just shot both of mine & said "I need one of these in 45";

"Thanks for the kudos. I'm quite proud of that puppy myself. Tell your friend that he has no idea of the efforts I made to bring a PC45 to fruition. I had one prototype made that was so sweet you would have given up both sex and beer to have one but could never sell it to management."
Hi Point already has that Covered. Honestly I don't see it as competitive whatsoever. If they made it takedown it could probably be competitive in the modern PCC market. What would be awesome would be a multi caliber takedown where you only swap the front section.
 
Hi Point already has that Covered. Honestly I don't see it as competitive whatsoever. If they made it takedown it could probably be competitive in the modern PCC market. What would be awesome would be a multi caliber takedown where you only swap the front section.
The folks that own Hi-Points seem to like them, but they strike me as kind of a disposable tool, because a lot of parts (including bolts IIRC) are made out of zinc alloy. A Ruger PC .45 would have been attractive to folks wanting a firearm that would last a good long time.

I know you've seen the Aero survival rifles - they seem to be one of the better current options for a multi-caliber PCC:

https://www.gunbroker.com/item/1030811283
As always IMHO, FWIW, YMNV, etc.
:)
 
An Interrupted Thread takedown version could pack down to Sub 2000 size. Since 10mm, 40,S&W, 357sig and 9mm use the same shell holder on my loading press a Bolt that works for them all should be easy. A swap barrel multi caliber takedown carbine would be worthy of attention in today's market.
 
Hi Point already has that Covered. Honestly I don't see it as competitive whatsoever. If they made it takedown it could probably be competitive in the modern PCC market. What would be awesome would be a multi caliber takedown where you only swap the front section.
Hi Point is single stack, tho. That, and the appearance of them, has kept me from owning one. If I hadn't already been in the process of assembling an AR in 45 ACP I would be in line for this. Still might ;-)
 
I done decided. I'm gettin' one. The only question is do I wait till our 2A Sales Tax Holiday in Aug, or jump on it as soon as they are available locally.:unsure:
 
Well I did it. $749 at the LGS. They just got this in the shop 2 days ago, and it was the only one they had. If the weather dries out some I'll sight it in today. I'll have to put an optic on it eventually, but the factory sights will do for now.

Ruger lc boxed.jpg


Ruger lc folded.jpg
 
Well I did it. $749 at the LGS. They just got this in the shop 2 days ago, and it was the only one they had. If the weather dries out some I'll sight it in today. I'll have to put an optic on it eventually, but the factory sights will do for now.

View attachment 38476

View attachment 38477
Congrats, looking forward to your shooting report.

I didn't notice in the release pics they changed the hand-guard from the 5.7 version.
 
Congrats, looking forward to your shooting report.

I didn't notice in the release pics they changed the hand-guard from the 5.7 version.
One other change from the 5.7 is the take down pin. It's retained in it's hole instead of coming completely out. So you have to push it from one side only until the grip frame is released and then your done. Probably a lot of 5.7 owners were losing the pin. ;)

I did shoot one mag yesterday, but just to check function. Too wet to hang paper, so just 13 random holes in my shootin' stump off the porch. No issues at all, everything worked as advertised.

I do like the grip on this gun. Feels very much like a 1911, even tho it's thicker. Narrower front to back tho, but the angle is the same as a 1911. All the controls are easily reached without changing your grasp if you have avg length digits. If you're comfortable with a 1911, you'll be good with this one.

Recoil is stout, but not uncomfortable with std range ammo. I haven't run any of the +P big boy ammo yet, but I expect it will be noticeably stronger. Especially the 255grn+P hardcast. :devilish:

One other thing: If the bolt is locked back (open) with no mag inserted, the slightest bump will release it & slam it into battery. I don't know if that's normal with the LC platform (this or 5.7) or not. It did surprise me.
 
Last edited:
I haven't had the issue with the bolt release on either of my 5.7s
Hmmm. I'll have to open it (again) and see if there's something wrong. I really don't want to send this in to Ruger. It's not a big deal unless you've got a finger in the way.

ETA: I emailed Ruger about this, but they'll probably tell me to read the manual. I did just find this little note:
 
Last edited:
  • Like
Reactions: Guv
I have one coming later this week. When I saw the original one in 5.7 it really caught my attention. Tried every way I could to justify getting into a new caliber.
Once I saw the 45 I briefly wished they had included a 9 version but after some more deliberation between my ears figured the 45 would be a better fit. I plan on doing some hog hunting with it also.
I really like the aluminum receiver and front rail setup, this also sold me on it.
 
Imagine if Ruger adapted the 5.7 pistol and this to 10mm and they shared mags!!! Perfect companion pair. Optic and cowitness on the pistol and a 2-4x prismatic on the carbine. Perfect out to 200yds.
 
I suggest that anyone considering buying one download the instruction manual from the Ruger site (or the below link), paying particular attention to the disassembly and assembly process. It's not what I would call a simple process. There's a couple things I don't particularly like: The 2 part bolt, and the buffer spring/guide rod assembly which looks a lot like the one in a Buckmark, in that it uses a 'C' clip to hold everything together (see the illustrated parts breakdown). I suspect the aftermarket suppliers will come up with a better captured spring assy. pretty quickly.

https://ruger-docs.s3.amazonaws.com/_manuals/lcCarbine-45Auto.pdf
I just bought one. It couldn’t be easier to field strip.
 
One other change from the 5.7 is the take down pin. It's retained in it's hole instead of coming completely out. So you have to push it from one side only until the grip frame is released and then your done. Probably a lot of 5.7 owners were losing the pin. ;)

I did shoot one mag yesterday, but just to check function. Too wet to hang paper, so just 13 random holes in my shootin' stump off the porch. No issues at all, everything worked as advertised.

I do like the grip on this gun. Feels very much like a 1911, even tho it's thicker. Narrower front to back tho, but the angle is the same as a 1911. All the controls are easily reached without changing your grasp if you have avg length digits. If you're comfortable with a 1911, you'll be good with this one.

Recoil is stout, but not uncomfortable with std range ammo. I haven't run any of the +P big boy ammo yet, but I expect it will be noticeably stronger. Especially the 255grn+P hardcast. :devilish:

One other thing: If the bolt is locked back (open) with no mag inserted, the slightest bump will release it & slam it into battery. I don't know if that's normal with the LC platform (this or 5.7) or not. It did surprise me.
I think most of the recoil is from the heavy two piece bolt. I noticed it’s listed quite a bit heavier than the LC 5.7.
I too am looking forward too shooting sighting mine in with some +P.
 

Latest posts

Back
Top