sliclee
Single-Sixer
For info-go to Brownells.com-tech-
For parts go to above and every other thing gun owners need. Lee
For parts go to above and every other thing gun owners need. Lee
meshugunner said:I am just getting started on this gunsmithing thing. Right now I pay other people to do trigger jobs for me...Thank you.
BBOB662 said:I just bought a current production RUGER BISLEY FLATTOP 44 SPECIAL, MDL #: 5236. Is the cylinder heat treated to enable it to be reamed to fire 44 Magnum loads?
I have 1000 rds of HSM, Cowboy Action, .44 mag, SWC Hardcast, 240 Grain cartridges left after trading my magnum that I'd like to use if possible.
Bisley is on large frame I believe. Vaquero to be more specific.
that looks just like what my older Brothers wants to have done to his 41 mag Hunter, did you do the work yourself ? or send it to some one ?Ok, here's alittle bit of work I did, back a couple yrs ago now, and all is still as it should be,,,,, Shoots Lights Out, currently sighted in @ 25 yards,,,,, ie.... my Red Zone, which = Pulling the Trigger,,,,, if and when it's needed.....
Hawk, Yea did all of the work myself, less the Mag-na-Porting and Front-Sight Cut-in, as well as cutting the Bbl and re-crowning accordingly, this was all done while at Mag-na-Port, take a look at my attachment Write-up......that looks just like what my older Brothers wants to have done to his 41 mag Hunter, did you do the work yourself ? or send it to some one ?