Sight pusher

[Papalote]

Has anyone used a sight pusher to remove the front sight and replace it with any kind of sight pusher. I'm changing some 10/22 sights to fire sights and don't like driving them in and out using a brass punch. Thanks

 

[bigbillyboy]

Williams gun sight co. Makes one . Works real good .

 

[Papalote]

I read up on the Williams pusher. Some said it would work on the 10/22. Some say it doesn't. Everybody seems to be out of them. They must be good

 

[bigbillyboy]

I bought one and used it once on my 10/22 , works good .

 

[Papalote]

OK, thanks. I'll try one.

 

[SAC09]

Never had any luck with sight pushers.

 

[oldcrab]

Sight Pusher = The cat's pajamas!

 

[bigbillyboy]

Before I got my pusher I researched a bit . The 10/22 front sight has a tighter fit than most guns . There is a bump on the bottom of the sight making it difficult to remove with hammer and punch. Now , There were guys sawing down thru the front sight to "weaken " it , then driving it out . Just not worth marking up the barrel or bending it to me , so I figure I may use the tool again ...

 

[TestEngineer]

If you can't find the Williams in stock, you might google the Wyoming Sight Pusher. Every review I've seen has been very positive.

 

[gnappi]

An Optometrist? Sight pusher... get it?

 

[Uncle Howie]

An Optometrist? Sight pusher... get it?

 

[Uncle Howie]

An Optometrist? Sight pusher... get it?

 

[Guv]

I have a 10/22 that I bought a Williams receiver sight for.
As a previous poster mentioned, that front sight was one TIGHT Bugga!
I am so happy I bought one of their sight pusher tools.
Awesome sight, awesome tool!