Mike in Michigan
Bearcat
- Joined
- Nov 1, 2014
- Messages
- 2
Recently attempted to install a Galloway trigger and spring kit in an LC9. Springs...no problem. New adjustable trigger and trigger bar...nothing but problems. Cannot get either combination of new/old trigger/trigger bar to move the hammer far enough to the rear,, moving the hammer stop far enough forward to allow the hammer to drop on the firing pin. Tried new trigger with old bar..no good. Old trigger with new bar..no good. Contacted Galloway and received a cut-and-paste response that was useless. Anyone having had and solved same situation, I would appreciate info on solution. Thanks, Mike