WTT/WTS- Bunch of parts-SOLD

[Robb Barnes]

Guys, it is time to thin down the parts box. Most all of these parts are for an old model gun except for the cylinder. It is a non-recessed head 357 cylinder so I assume it came from a new model gun. The single ejector rod on theleft is a dimpled headed version of one of the early flat top 357s. The hammer in the upper left is for a single six and the rest off the stuff is self explanitory except the stubby barrel. It came off a 44 flat top that some one cut off at 3 3/8" and it has NOT been recrowned or finished at the end.There is one OM trigger and two OM conversion triggers along with a few OM conversion parts. The sights are complete with pins, screw and springs and the screw sets are for the action screws and the grip frame. The grips are for a Super Blackhawk. You can have it all for $175 and I'll ship it all to you. The first "I'll take it" takes precedent but feel free to shoot me trade ideas as well.

Thanks for looking,

Robb

 

[Robb Barnes]

Guys, if you look close at this parts group you will find all the parts needed to "Unconvert" and old model single six. Hammer, trigger, basepin, bolt, pawl etc are all there so all the other stuff is kind of like extra gravy on the mashed potatoes. I grouped it all together just to avoid multiple trips to the post office.

Robb

 

[cellar701]

I will take it. PM sent.

 

[street]

It is a non-recessed head 357 cylinder so I assume it came from a new model gun. Robb

Robb. I don't think the 357's ever had recessed cylinders. I might be wrong but I don't think they did.

 

[Robb Barnes]

I think you are right Street, I brain faded on that one. :oops: