LSCG
Buckeye
got some 1911 grips for trade. would also sell if someone wanted or would do a partial trade plus cash. value of the grips would be in the $80 to $110 range, per set.
i'm looking for,
9mm and 45colt Dillon SDB conversion kits.
a quality scout scope or handgun scope. would also make a set of single action grips for a good scope.
.257 rifle bullets.
.264 rifle bullets.
.284 rifle bullets.
.308 rifle bullets.
casting lead.
7.62x39 or 7.62x51/308 ammo.
7x57, 6.5x55 or 7.62x54R rifle dies.
rifle bullet molds for 22cal, 25cal, 6.5 cal or 7mm.
once fired brass in the following calibers, 222rem, 6.5x55 Swedish, 7.62x54R, 327Mag, 357Mag, 44spl, 45colt.
Lee Push through bullet sizing dies in the following sizes. .225, .285, .309, .452, .454.
thanks for looking,
Zane.
#1 stabilized and dyed maple burl.
they are full size, standard thickness and have a covered MSH pin and beveled bottoms.
#2 stabilized Box Elder Burl.
they are full size, standard thickness and have the MSH pin cut and beveled bottoms.
#3 stabilized maple burl.
they are full size, standard thickness and have a covered MSH pin and beveled bottoms.
#4 stabilized and dyed maple burl.
they are full size, slim thickness and have a covered MSH pin and flat bottoms.
#5 stabilized Box Elder Burl.
they are full size, standard thickness and are cut for a bobtail 1911.
i'm looking for,
9mm and 45colt Dillon SDB conversion kits.
a quality scout scope or handgun scope. would also make a set of single action grips for a good scope.
.257 rifle bullets.
.264 rifle bullets.
.284 rifle bullets.
.308 rifle bullets.
casting lead.
7.62x39 or 7.62x51/308 ammo.
7x57, 6.5x55 or 7.62x54R rifle dies.
rifle bullet molds for 22cal, 25cal, 6.5 cal or 7mm.
once fired brass in the following calibers, 222rem, 6.5x55 Swedish, 7.62x54R, 327Mag, 357Mag, 44spl, 45colt.
Lee Push through bullet sizing dies in the following sizes. .225, .285, .309, .452, .454.
thanks for looking,
Zane.
#1 stabilized and dyed maple burl.
they are full size, standard thickness and have a covered MSH pin and beveled bottoms.
#2 stabilized Box Elder Burl.
they are full size, standard thickness and have the MSH pin cut and beveled bottoms.
#3 stabilized maple burl.
they are full size, standard thickness and have a covered MSH pin and beveled bottoms.
#4 stabilized and dyed maple burl.
they are full size, slim thickness and have a covered MSH pin and flat bottoms.
#5 stabilized Box Elder Burl.
they are full size, standard thickness and are cut for a bobtail 1911.
