SPF
I got this 327 Federal SP101 about 2 years ago. I am the 2nd owner. It has had action/trigger work done on it and the trigger pull is smooth, but still heavy enough to have 100% reliability in firing all factory ammo I have used: Federal 85 grain, 100 grain, and the Speer 115 grain GDHP.
It has Pachmayr Compac grips (can't seem to locate the stock Ruger grips), a pkt of 6 A-Zoom 32 caliber snap caps (32 S&W short, so they can be used in many 32 caliber revolvers: 32 SW short, 32 SW, 32 SW Long, 32 H&R mag, 327 Federal).
Also included are Wolff gun springs: reduced hammer springs in 10 lb. and 12 lb. (the 10 lb. spring is in the gun right now), and a 8 lb. trigger return spring. The stock hammer spring is also included and is saved inside the Wolff 10 lb. packet for safe keeping should anyone want to change the gun back.
The gun comes with the Ruger gray plastic box, with serial number matched to the gun, the fired case envelope with a date of 7/14/2008. Also included is the Ruger instruction manual and Ruger padlock.
Barrel length is 3-1/16" and the finish is stainless.
I have only fired about 50 rounds through the gun; just enough to run loads over my Chrony and shoot up some water jugs to see how the caliber does. But the gun is just laying around now and doesn't get used much since I got my Single Six 32 back from Alan Harton.
I am asking $405 shipped to your FFL dealer from my FFL dealer; $390 face-to-face in Yamhill County Oregon. I use the USPS medium flat rate box, insured, which usually ships in 2-3 days. I will ship the Wolff springs, snap caps and Ruger lock to you in a USPS small flat rate box to make sure they don't bounced around on the gun or "disappear" during shipment. I prefer a USPS money order or a cashier's check from Chase bank.
***SOLD***
I got this 327 Federal SP101 about 2 years ago. I am the 2nd owner. It has had action/trigger work done on it and the trigger pull is smooth, but still heavy enough to have 100% reliability in firing all factory ammo I have used: Federal 85 grain, 100 grain, and the Speer 115 grain GDHP.
It has Pachmayr Compac grips (can't seem to locate the stock Ruger grips), a pkt of 6 A-Zoom 32 caliber snap caps (32 S&W short, so they can be used in many 32 caliber revolvers: 32 SW short, 32 SW, 32 SW Long, 32 H&R mag, 327 Federal).
Also included are Wolff gun springs: reduced hammer springs in 10 lb. and 12 lb. (the 10 lb. spring is in the gun right now), and a 8 lb. trigger return spring. The stock hammer spring is also included and is saved inside the Wolff 10 lb. packet for safe keeping should anyone want to change the gun back.
The gun comes with the Ruger gray plastic box, with serial number matched to the gun, the fired case envelope with a date of 7/14/2008. Also included is the Ruger instruction manual and Ruger padlock.
Barrel length is 3-1/16" and the finish is stainless.
I have only fired about 50 rounds through the gun; just enough to run loads over my Chrony and shoot up some water jugs to see how the caliber does. But the gun is just laying around now and doesn't get used much since I got my Single Six 32 back from Alan Harton.
I am asking $405 shipped to your FFL dealer from my FFL dealer; $390 face-to-face in Yamhill County Oregon. I use the USPS medium flat rate box, insured, which usually ships in 2-3 days. I will ship the Wolff springs, snap caps and Ruger lock to you in a USPS small flat rate box to make sure they don't bounced around on the gun or "disappear" during shipment. I prefer a USPS money order or a cashier's check from Chase bank.
***SOLD***
