ncrobb
Single-Sixer
As a hobby business I make custom knives. Normally I am blessed with enough orders to keep me busy but I had time to work in a couple extra over the last month or two and I thought I would post them here to see if any one was interested. Both of these are hand ground in my shop, heat treated in a Paragon oven and I do the leather work as well. The details:
SOLD Bone Handled Drop Point #070 - $350 SOLD
Blade
Material: ATS-34 stainless steel
Thickness: 1/8”
Length: 4”
Profile: drop point leaf with stick tang
Grind: hollow radius
Finish: high polish
Handle
Material: deer leg bone
Ferrule: polished copper washer
OAL: 8-1/8”
Sheath
Material: 8-9 oz vegetable tanned leather
Style: layered pouch with concho on belt
Tooling: flower sunrise with double stamped running boarder
Color: medium brown
Stitching: saddle in sinew
Sway Back Jack #069 - $225
Blade
Material: ATS-34 stainless steel
Thickness: 1/8”
Length: 3-3/16”
Profile: modified Wharncliffe with full tang
Grind: hollow chisel with slight back cut
Finish: brushed satin with polished bevel
Handle
Material: black linen Micarta
Thickness: 1/4"
Pins: black linen Micarta
OAL: 7-7/8”
Sheath
Material: 8-9 oz vegetable tanned leather
Style: split toe pouch
Tooling: arrowhead design with boarder stamping
Color: black
Stitching: saddle in black thread
If you would like to see additional pics of either one send me your e-mail address in a pm and I will get them out to you as soon as I can. Check out my Facebook page, Silent E knives, to see others I have made. Sorry for the long post; I copied the info off my details sheet for these two and pasted it in. The picture makes the drop point look more rounded at the point than it is; there is a reflection on it.
Thanks for looking,
Robb
SOLD Bone Handled Drop Point #070 - $350 SOLD
Blade
Material: ATS-34 stainless steel
Thickness: 1/8”
Length: 4”
Profile: drop point leaf with stick tang
Grind: hollow radius
Finish: high polish
Handle
Material: deer leg bone
Ferrule: polished copper washer
OAL: 8-1/8”
Sheath
Material: 8-9 oz vegetable tanned leather
Style: layered pouch with concho on belt
Tooling: flower sunrise with double stamped running boarder
Color: medium brown
Stitching: saddle in sinew
Sway Back Jack #069 - $225
Blade
Material: ATS-34 stainless steel
Thickness: 1/8”
Length: 3-3/16”
Profile: modified Wharncliffe with full tang
Grind: hollow chisel with slight back cut
Finish: brushed satin with polished bevel
Handle
Material: black linen Micarta
Thickness: 1/4"
Pins: black linen Micarta
OAL: 7-7/8”
Sheath
Material: 8-9 oz vegetable tanned leather
Style: split toe pouch
Tooling: arrowhead design with boarder stamping
Color: black
Stitching: saddle in black thread
If you would like to see additional pics of either one send me your e-mail address in a pm and I will get them out to you as soon as I can. Check out my Facebook page, Silent E knives, to see others I have made. Sorry for the long post; I copied the info off my details sheet for these two and pasted it in. The picture makes the drop point look more rounded at the point than it is; there is a reflection on it.
Thanks for looking,
Robb
