WTB: TC Encore barrel damaged or needs repair

[xman9282]

I am looking for a damaged barrel for a Thompson Center Encore rifle, pistol, shotgun or muzzleloader. Caliber is unimportant. Rusty is OK. This is for a project I am working on and only need the barrel lug and breech in tact. It will be bored out to create a sleeve.

 

[Hawk-in-Wi]

I've got a stainless 204 barrel that doesn't shoot as good as I would like , other wise barrel is fine , would be willing to sell it pretty cheap , why don't you send me PM with what you're thinking price wise and we'll go from there

 

[xman9282]

Nobody out there has a barrel they jammed in the mud and then pulled the trigger?

I'm just looking for a barrel lug and the portion it is welded to

 

[xman9282]

trying to build a 30 Badger

 

[montana outfitters]

Just have one made!!!!!!!!!!!!!!!!

 

[xman9282]

That takes all the fun out of it!

 

[Hawk-in-Wi]

trying to build a 30 Badger

I know of Jim Calhoons 19 Badger but what is the 30 Badger ?
http://www.jamescalhoon.com/

 

[xman9282]

38 special necked to 30 cal with 30 Mauser or 7.62 tokarev die. Cheap brass and low pressure

 

[El Bango]

Why not start with an existing.30 caliber barrel (30-30,.308, .30-06 etc.) and either make or have made a chamber adaptor? You obviously have access to a lathe and a chamber reamer. You could have your .30 Badger without butchering a good barrel. I make mine from used barrels,dial in the bore,rough ream,turn outside profile,finish ream,part off, deburr,relieve for extractor,make or buy extractor,install and have fun.