WTB RCBS 505 or 510 Pan and Holder for Scale

[theduke308]

I need a pan and holder for a RCBS scale

 

[DeletedMember275]

Have you contacted RCBS? I'd expect that would be your best bet.

 

[Flash]

On inexpensive items such as these, it's possible RCBS could send them for free or charge you a modest fee. On their web site, there is a link labeled, "Ask RCBS" and in doing so, they will get your email address for a quick reply and your name and street address for shipping. I had to rely on them twice for small parts and they were great about it. Once for a powder measure drop tube and again, for a return spring on the bench mounted (old style) primer system.

Since the holder has lead shot in the bottom cup to zero the scale, you may want to match your weights against a couple other scales to make sure it's accurate.

 

[s4s4u]

On inexpensive items such as these,

I just checked the RCBS website and they want $20 for the tray and $22 for the support arm. I also thought they would be inexpensive but.....

 

[Tellico]

Whole scale for less than that on Ebay. Same pan and holder I think. As stated check with known acc. scale or use check weights to verify after changing any part.

http://www.ebay.com/itm/RCBS-MODEL-502-RELOADING-SCALE-MINT-LOOK-/180761502115?pt=LH_DefaultDomain_0&hash=item2a1639a1a3

 

[Flash]

On inexpensive items such as these,

I just checked the RCBS website and they want $20 for the tray and $22 for the support arm. I also thought they would be inexpensive but.....

Whew!

 

[slowrider]

You need to call them on the phone and tell them you need such and such parts to get the deal....been my experience anyway.

 

[snake803]

You need to call them on the phone and tell them you need such and such parts to get the deal....been my experience anyway.

+1...
JIM...................