I can't help you with the tool, but....
If you're talking an 1100...once the gun is reassembled, the latch will stay in place by itself. A bit tricky but doable.
As far as using a touch of JB Weld to hold it in place, that is not an uncommon "fix".
Oh, one more thing; Be real careful when sticking your fingers inside the receiver because there's some very sharp edges in there.
Hope this helps.
DGW
If you're talking an 1100...once the gun is reassembled, the latch will stay in place by itself. A bit tricky but doable.
As far as using a touch of JB Weld to hold it in place, that is not an uncommon "fix".
Oh, one more thing; Be real careful when sticking your fingers inside the receiver because there's some very sharp edges in there.
Hope this helps.
DGW
