SPF: S&W 5-Screw K-22 Masterpiece w/Phantom II

weaselmeatgravy

Moderator
Staff member
Moderator
Joined
Mar 28, 2001
Messages
3,853
City & State/Province
Colorado native, Vermont transplant
Nice tight post-war 5-screw S&W K-22 Masterpiece with 6" barrel and Bushnell Phanton II 2.5X scope. Gun has some wear consistent with its age, thin blue on high edges, muzzle, cylinder, extractor rod. Quality old P&R Smith with good bore and mechanics. Scope has caps shown in last pic, strap still there but not visible.

SPF $550xxxx $500 shipped to FFL or C&R

SW-K22-MP-01.jpg


SW-K22-MP-02.jpg


SW-K22-MP-03.jpg


SW-K22-MP-04.jpg


SW-K22-MP-05.jpg


SW-K22-MP-06.jpg


SW-K22-MP-07.jpg
 
I love K-22's so I'm interested. But I don't know how that scope mount works. Is it a clamp on or does it go in the rear sight position or is it a drill and tap? Any idea what it would look like with the scope and mount removed? And what happened to the rear sight?

Thanks,

Gregg
 
I do not have the rear sight. There is one D/T hole in the sight channel. The scope mount uses two studs, one screwed into the D/T hole and one slid into the back of the sight channel. The studs are tapered, wider at the top. The two studs slip into two holes in the bottom of the sight base, then the 4 smaller Allen head screws are tightened to clamp the base to the studs. The top of the base and bottom of scope are dovetailed and there are two half-round notches in the bottom of the scope that align with the larger holes in the base. So the dovetail holds the scope down and prevents side-t-side movement, and the upper hex head screws keep it from sliding fore/aft.

Seems really, really strong for a .22 and also really, really complicated for anything.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Back
Top