FIRERESCUEO2
Bearcat
I have a used Ruger NM Blackhawk, Blue, 7.5" barrel in .45LC that I just don't shoot and can't seem to get into - so I'm looking for a possible trade or sale. I purchased this used and have run 50+/- rounds thru it. I'm not up on my revolver jargon so I will describe what I see as best as possible.
This appears to be in very good overall condition with some light handling marks due to normal use. There is one very small spot (1/8" circle) of what appears to be surface rust on the exterior wall of the cylinder - looks to have been stored with a small droplet of moisture on it. I took a picture and posted it below. That is the only sign of any rust that I can find on the entire gun and other than that, the finish/bluing is in very good condition. It was fairly dirty from being shot when I picked it up but the Bore and cylinder walls look excellent after I cleaned it up and oiled it. During cleaning and inspection I noticed that the cylinder is lightly etched internally on the loading end with a #4 and a #2 - not sure if that is normal factory etch for .452 or not - as this is my very first single action. This also came with the B-Square Weaver rail installed - so there is not a factory rear sight with it.
Serial # 47-58XXX
Package Includes:
Ruger NM Blackhawk
"B-Square" No-Drill Full Length Weaver Rail
Uncle Mikes Sidekick Bandolier #4 (RH 7.5" Scoped Holster)
950 (Approximate Count) 250Gr 45Cal .452 FP Bullets (Box of 500 + Box of 450).
14 Count Hornady 225Gr FTX Factory Rounds
50 Count .45LC Brass - Mixed HS (mostly RP with a few Hornady, SL, Win)
Lee Deluxe .45LC 4-Die Carbide Set - Like New Condition
Lee .45LC Length Case Gage & Cutter - Like New Condition
FTF near Oak Ridge, TN 37830
$400.00 Shipped - Pistol, B-Square Rail & Uncle Mikes Holster
$150.00 Shipped - 950 Bullets + Brass + Dies + 14 Factory Hornady Rounds (After pistol is sold)
$550.00 Shipped - Complete Package to your FFL
I'm looking for a Ruger LCR 357Mag, Ruger SP101 2.25" - 3" 357Mag or SIG 238SAS as possible trades.
Complete Package Pic
Profile Pic
Cylinder Side Profile - Rust Spot Pic
(Rust Spot on RH Edge of Cyl. Dead Center)
Internal Cylinder Pic
This appears to be in very good overall condition with some light handling marks due to normal use. There is one very small spot (1/8" circle) of what appears to be surface rust on the exterior wall of the cylinder - looks to have been stored with a small droplet of moisture on it. I took a picture and posted it below. That is the only sign of any rust that I can find on the entire gun and other than that, the finish/bluing is in very good condition. It was fairly dirty from being shot when I picked it up but the Bore and cylinder walls look excellent after I cleaned it up and oiled it. During cleaning and inspection I noticed that the cylinder is lightly etched internally on the loading end with a #4 and a #2 - not sure if that is normal factory etch for .452 or not - as this is my very first single action. This also came with the B-Square Weaver rail installed - so there is not a factory rear sight with it.
Serial # 47-58XXX
Package Includes:
Ruger NM Blackhawk
"B-Square" No-Drill Full Length Weaver Rail
Uncle Mikes Sidekick Bandolier #4 (RH 7.5" Scoped Holster)
950 (Approximate Count) 250Gr 45Cal .452 FP Bullets (Box of 500 + Box of 450).
14 Count Hornady 225Gr FTX Factory Rounds
50 Count .45LC Brass - Mixed HS (mostly RP with a few Hornady, SL, Win)
Lee Deluxe .45LC 4-Die Carbide Set - Like New Condition
Lee .45LC Length Case Gage & Cutter - Like New Condition
FTF near Oak Ridge, TN 37830
$400.00 Shipped - Pistol, B-Square Rail & Uncle Mikes Holster
$150.00 Shipped - 950 Bullets + Brass + Dies + 14 Factory Hornady Rounds (After pistol is sold)
$550.00 Shipped - Complete Package to your FFL
I'm looking for a Ruger LCR 357Mag, Ruger SP101 2.25" - 3" 357Mag or SIG 238SAS as possible trades.
Complete Package Pic
Profile Pic
Cylinder Side Profile - Rust Spot Pic
(Rust Spot on RH Edge of Cyl. Dead Center)
Internal Cylinder Pic
