Shooting table leg brackets
- Thread starter rjencks
- Start date
No photo
Expired
Shooting table leg brackets
Asking price
-
Listed
Description
Recently I built a few tables for family and friends. We wanted versatility in what we used for legs and came up with this design. The bracket works best with 1 1/2" electrical EMT conduit for light weight and 1/ 1/4" black schedule 40 for someone that wants some weight to it.
Plates are 4" x 4" plates with 3/8" holes
We had to order a 22' piece of tubing, so I have a bunch left over and thus the ad.
For a set of three brackets, 60$ shipped in a medium flat rate box. If you want multiple sets, we can deduct $13 a set, as long as they all fit in the same box.
I also have two table tops left over (24" wide tapered to 12" by 42" long). They are 3/4" plywood, with routered edges and two cut outs to stand your rifles up to cool. If anyone is interested.... $50 plus actual shipping. If the table tops sell and there is interest for more, I will probably upgrade to a 1" MDO plywood and adjust the price a bit to cover cost.
Please send orders via PM.
Plates are 4" x 4" plates with 3/8" holes
We had to order a 22' piece of tubing, so I have a bunch left over and thus the ad.
For a set of three brackets, 60$ shipped in a medium flat rate box. If you want multiple sets, we can deduct $13 a set, as long as they all fit in the same box.
I also have two table tops left over (24" wide tapered to 12" by 42" long). They are 3/4" plywood, with routered edges and two cut outs to stand your rifles up to cool. If anyone is interested.... $50 plus actual shipping. If the table tops sell and there is interest for more, I will probably upgrade to a 1" MDO plywood and adjust the price a bit to cover cost.
Please send orders via PM.
dkmlever
Single-Sixer
Pm sent
T.A. workman and Dkmlever, I responded to your PM's but they are still showing in my outbox.
If you don't see them soon, you can email me at [email protected]
If you don't see them soon, you can email me at [email protected]
dkmlever
Single-Sixer
PM's always show in your outbox until the person reads them.
how long are the legs?
Hawk-in-Wi said:
This ad is just for the brackets to secure the removable legs to the table.
I recommend 32" on which ever pipe you decide on. The electrical EMT is thin wall and easy to cut, if you decide you need it lower. It's going to depend on what you use for a rest, a chair, and what makes you comfortable.
I got a set of the brackets and a table top and was very pleased! The brackets are the bee's knee's for a light weight portable shooting bench.
Terry
Terry
I'm going to bump this one more time before I start a new thread.
I sat down with the calculator and realized I'm losing money on these. I'm not complaining, nor I was thinking in was going to get rich making these. But, I didn't want to lose money either.
I have one more set of leg brackets I'll let go for $60.
After those sell, I'm going to have raise the price to $75 for the set of three leg brackets shipped TYD.
Unfinished birch veneer table tops are $75 PLUS actual shipping.
Also if anybody is interested, I finish, assemble, and ship complete tables.
I sat down with the calculator and realized I'm losing money on these. I'm not complaining, nor I was thinking in was going to get rich making these. But, I didn't want to lose money either.
I have one more set of leg brackets I'll let go for $60.
After those sell, I'm going to have raise the price to $75 for the set of three leg brackets shipped TYD.
Unfinished birch veneer table tops are $75 PLUS actual shipping.
Also if anybody is interested, I finish, assemble, and ship complete tables.
Similar threads
Latest posts
-
-
-
-
-
-
-
For Sale #12: Browning 78 Falling Block .45-70 (1976 model) $1050- Latest: kentucky yeti
-
-
