Complete metallic and shotshell reloading set up. All equipment is in good condition.
Total new price exceeds $5,000.
My price: $1,500, firm
__________________________________
RCBS Rockchucker Press
RCBS Piggyback Progressive Add-on
RCBS Sidewinder motorized case cleaner
Dillon CV-500 vibrating case cleaner
Dillon RT1200 motorized case trimmer
Dillon depriming swage for military cases
Dillon D-Terminator electronic scale
Dillon media separator
2 RCBS Uniflow powder measures with stands
RCBS manual case trimmer
Lyman balance scale
RCBS dial caliper
RCBS bullet puller
RCBS powder trickler
5 RCBS shell plates
Loading dies (.41, .38, .30 car, .308, 9mm, .40, .45, .44, .223, .30-30, etc.)
Other dies (powder checker, lube, X Sizer, universal uncapper)
MEC Sizemaster shotshell reloading press -12 ga
MEC Junior shotshell reloading press -12 ga
Texan Model ST shotshell reloading press -12 ga (well used)
2 Lee Load-All shotshell reloading presses -12 ga
MEC Universal charge bar
4 cans Winchester 748
1 can Hodgdon H110
1 can Pyrodex
1 cab American Pioneer FFFG
Approx 1/2 can Alliant Blue Dot
Approx 6,000 primers (shotshell, pistol, rifle)
Approx 1,500 bullets (.22, 9mm, .38, .45. 308)
Approx 3,000 brass cases (5.56, .357, 9mm, 10 mm, .308, .45, .44)
Misc: loading blocks, shell cases, case lube, cleaning media, etc.)
I want to sell everything as a package.
If I don't sell the equipment in Tucson, I will take it with me when I move to Portland, OR in a couple of weeks and put it up for sale there.
Total new price exceeds $5,000.
My price: $1,500, firm
__________________________________
RCBS Rockchucker Press
RCBS Piggyback Progressive Add-on
RCBS Sidewinder motorized case cleaner
Dillon CV-500 vibrating case cleaner
Dillon RT1200 motorized case trimmer
Dillon depriming swage for military cases
Dillon D-Terminator electronic scale
Dillon media separator
2 RCBS Uniflow powder measures with stands
RCBS manual case trimmer
Lyman balance scale
RCBS dial caliper
RCBS bullet puller
RCBS powder trickler
5 RCBS shell plates
Loading dies (.41, .38, .30 car, .308, 9mm, .40, .45, .44, .223, .30-30, etc.)
Other dies (powder checker, lube, X Sizer, universal uncapper)
MEC Sizemaster shotshell reloading press -12 ga
MEC Junior shotshell reloading press -12 ga
Texan Model ST shotshell reloading press -12 ga (well used)
2 Lee Load-All shotshell reloading presses -12 ga
MEC Universal charge bar
4 cans Winchester 748
1 can Hodgdon H110
1 can Pyrodex
1 cab American Pioneer FFFG
Approx 1/2 can Alliant Blue Dot
Approx 6,000 primers (shotshell, pistol, rifle)
Approx 1,500 bullets (.22, 9mm, .38, .45. 308)
Approx 3,000 brass cases (5.56, .357, 9mm, 10 mm, .308, .45, .44)
Misc: loading blocks, shell cases, case lube, cleaning media, etc.)
I want to sell everything as a package.
If I don't sell the equipment in Tucson, I will take it with me when I move to Portland, OR in a couple of weeks and put it up for sale there.
