RugerForum.com

This is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.
It is currently Wed Dec 01, 2021 6:58 am

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sun Oct 10, 2021 1:05 pm 
Hawkeye

Joined: Mon Nov 05, 2007 4:40 pm
Posts: 8865
Location: Dallas, TX
I was out shooting today, I didn't stay too long, it was really windy and still pretty humid. Anyway, I had both my Browning Black Label and Glock 44 today. Both in 22 lr. I thought I'd take some pictures of both of them side by side. It's surprising how similar they are. Virtually identical in size. The Glock is wider of course. When gripping the Browning, it is very thin in comparison.

Both have white dot sights. The Browning has a three dot setup and the Glock has a white outline around the rear sight. The Glock's white paint is brighter. Although the Browning's white dots are still very visible. I think I like the Glock's rear sight better. The white outline is pretty thick, and makes quick follow up shots very easy. The sight, and since it's just a 22, the gun pretty much just stays on target.

I really like the trigger on the Glock. Well, I like the trigger on the Browning also. But the Glock's trigger feels different. The pull weight is very close to each other. I don't have a gauge, but they both feel the same. It's just the slack and take up do both feel completely different from each other.

Glock goes to great length to talk about how to load their magazines and they have a video about it online. They advertise how the magazine has an assist tab to help. As you can see in the pictures, Browning also has an assist tab on their Black Label magazines. Each brand of magazine is very easy to load with this assist tab. I really wish Ruger would put something similar on the Mark IV magazines. They have those buttons, but they dig into your fingers. I was very slow and deliberate when loading the Glock. I followed the directions and loaded the gun the way Glock describes in the video.

I shot CCI Mini-Mags Round Nose in the Glock, and not a single blip. No stove pipes, no FTE, or FTF, or anything. It worked flawlessly. This is only the second time I've had the gun out, and it only has 150 rounds through it, but so far, no problems at all.

The Browning is the same way. I've had that gun for 3 or 4 years, and it really only jams up when it's dirty. I've taken it out quite a lot, and honestly, it only fouls up when it's dirty, otherwise, it too runs like a champ.

I think the Browning is just a bit more accurate. But, I'm more familiar with it. I think over time, the Glock will be just as accurate. It's plenty accurate right now, but today seemed to shoot low and to the left. But, like I said, it was really windy. I took it out today mostly to see if it would jam up. My daughter has shot the Browning quite a bit, and is pretty comfortable with it.

All in all, I really like both guns. They aren't competition target grade pistols, but that's ok. This is my first Glock, and after shooting it, I think I'd really like to go get one in 9mm and see how it performs.

Image

Image

Image

Image


Top
 Profile  
 
PostPosted: Mon Oct 11, 2021 5:52 am 
Blackhawk

Joined: Wed Nov 02, 2005 2:01 am
Posts: 976
Location: South West Indiana
Nice review. Thanks for posting.


Top
 Profile  
 
PostPosted: Mon Oct 11, 2021 6:43 am 
Hunter

Joined: Wed Dec 01, 1999 2:01 am
Posts: 3860
Location: Texas
I have some Kimber rimfires, so haven't been interested in the Browning 1911-clones, but thanks for the info.

I also have some Glock 44s and haven't had a moments trouble from them.


Top
 Profile  
 
PostPosted: Mon Oct 11, 2021 10:38 am 
Hawkeye

Joined: Mon Nov 05, 2007 4:40 pm
Posts: 8865
Location: Dallas, TX
9x19 wrote:
I have some Kimber rimfires, so haven't been interested in the Browning 1911-clones, but thanks for the info.

I also have some Glock 44s and haven't had a moments trouble from them.


Good to know about your trouble free Glocks. I didn't actually read any reviews before I bought mine. I knew they came out and wanted one, but hadn't heard about all the trouble until after I bought it. I was a little nervous to take it out the first time, but am so glad I bought this.

It's a pleasure to shoot, and no trouble so far.


Top
 Profile  
 
PostPosted: Mon Oct 11, 2021 2:49 pm 
Hunter
User avatar

Joined: Thu Aug 26, 2010 9:01 pm
Posts: 2984
Location: Boonesborough, KY
I really like my 44, it gets better every time I shoot it.

_________________
"It ain't who shoots first and it ain't who shoots most; it's who HITS first. A corollary - the sooner you kill that SOB, the sooner he'll quit shooting at you. The ability to hit what you're shooting at trumps all others, and hanging 47 accessories from a cheese-grater forearm and having a 30 round magazine won't help that - practice will." -Rugerforum.com member WWB


Top
 Profile  
 
PostPosted: Mon Oct 11, 2021 3:37 pm 
Blackhawk

Joined: Sun May 28, 2017 2:51 pm
Posts: 959
Location: Nut Bush City Limits
It is not difficult to install a fiber optic front sight on a Glock.

So simple, even I can do it, and have done it.


Top
 Profile  
 
PostPosted: Mon Oct 11, 2021 6:46 pm 
Blackhawk

Joined: Sat Feb 28, 2009 10:16 pm
Posts: 968
Location: NC
Kevin - nice review and photos, thanks for sharing.

Regarding your comment: "Each brand of magazine is very easy to load with this assist tab. I really wish Ruger would put something similar on the Mark IV magazines. They have those buttons, but they dig into your fingers". I cut a small piece from an old terrycloth towel and place it between the button and my thumb when loading my Mark IV magazines. It makes a big difference.

Jim


Top
 Profile  
 
PostPosted: Sun Oct 17, 2021 9:40 am 
Buckeye

Joined: Wed Mar 29, 2017 9:14 pm
Posts: 1477
Location: Idaho
Besides taking the time to test the guns side by side. You did a great job writing it all up. It was better done than some articles I have read in gun mags.


Top
 Profile  
 
PostPosted: Sun Oct 17, 2021 1:15 pm 
Hawkeye

Joined: Mon Nov 05, 2007 4:40 pm
Posts: 8865
Location: Dallas, TX
kmoore wrote:
Besides taking the time to test the guns side by side. You did a great job writing it all up. It was better done than some articles I have read in gun mags.


Thank you, that is very nice.

As a continuation, I took the Glock back to the range today and put another 100 rounds of Winchester Super X through it. I don't think the Winchester ammo was as accurate as the CCI Mini Mags. But anyway, the gun fired them all without any sort of problem at all.


Top
 Profile  
 
PostPosted: Mon Oct 18, 2021 11:28 am 
Hawkeye

Joined: Sun Mar 24, 2002 2:01 am
Posts: 9042
Location: Oregon City, Oregon
I am pleased you have a Glock 44 that functions as intended. Many of us were not so lucky. If Glock corrected the magazine issues, and if that's why they now function correctly, they kept that information to themselves, and pretty much kicked the rest of us to the curb.

I learned how to minimize malfunctions in mine, but enough was enough, and it went down the road at a bargain price for the next owner to experiment with.

Bottom line... The Glock 44 is otherwise such a nice shooting and shooter friendly pistol. 8)


Top
 Profile  
 
PostPosted: Tue Oct 19, 2021 8:37 am 
Hawkeye

Joined: Mon Nov 05, 2007 4:40 pm
Posts: 8865
Location: Dallas, TX
Wayno:
I think I remember you discussing the issues you had with your Glock 44. I'm really sorry, because they are nice pistols. I absolutely love the trigger on it. In fact, I think I like it better than the TandemKross trigger on my Mark IV 22/45. That trigger has too much creep, and overall feels kind of...not cheap, but flimsy, like it's going to fall apart. The Glock's trigger is smooth and consistent through the entire arc.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group